Nikon SB-28 instruction manual Optional accessories, Usable sync cords

Optional accessories

Connecting the SB-28 to your camera using a sync cord

You can connect the SB-28 to your camera by attaching a sync cord to the SB-28’s sync terminal.

• You cannot use a sync cord when the SB-28 is set to the t mode.

Usable sync cords

SC-11 (approx. 25 cm)

SC-15 (approx. 1m)

NOTE

•To connect the SB-28 to a camera without a sync terminal, use optional Sync Terminal Adapter AS-15.

•Use the sync/multiple flash terminal when connecting the SB-28 to other Nikon flash units via sync cords.

•When the SB-28 is connected to a camera via a sync cord, it provides neither automatic sync speed setting nor ready-light indication inside the camera’s viewfinder. To maintain all functions, use the optional TTL Remote Cord SC-17.

•If a non-Nikon flash unit—one incorporating a high-voltage (above 50V) or negative voltage sync circuits—is connected to the SB-28’s sync/multiple flash terminal, the SB-28’s protection circuit is activated, resulting in improper operation of the unit.

84