Nikon SB-28 Setting the built-inwide flash adapter, To change to 18mm, press the button once

Setting the built-in wide flash adapter

The SB-28 comes with a wide flash adapter to increase the angle of coverage to match an 18mm or 20mm lens.

1Slide out the wide flash adapter 1 and gently push it down into place in front of the flash head 2.

•Because the bounce card comes out at the same time, return it 3 to its original position inside the flash head.

•The zoom-head position indicator changes to 20mm and the indicator bars _ display the appropriate flash shooting distance range.

2 To change to 18mm, press the ' button once.

—The zoom-head position indicator toggles between 18mm and 20mm each time you press the ' button.

•To replace the wide flash adapter, lift it up and slide it back into its original place inside the flash head.

If the built-in wide flash adapter is broken off accidentally, it is no longer possible to set 18 or 20mm.

In this case, press the ' and [ buttons simultaneously for approx. 4 sec. until the zoom-head position indicator starts blinking, making it possible to adjust the zoom-head automatically or manually to its six basic settings (24, 28, 35, 50, 70, 85mm).

21