Nikon SB-28 instruction manual Adjusting the zoom-headposition, Other camera/lens combinations

Adjusting the zoom-head position

NOTE

To cancel automatic zoom-head positioning and set the position manually:

1Press the ' and { buttons simultaneously for approx. 2 sec. until the small M above ZOOM starts blinking.

Then press the ' button and set the desired zoom-head position manually.

2The zoom-head position indicator changes every time you press the ' button:

24mm 28mm 35mm 50mm 70mm 85mm

Once set manually, the zoom-head position is locked and does not change even when the power is turned off and on again or the lens is changed.

—To resume automatic zoom-head position adjustment, press the ' and { buttons simultaneously for approx. 2 sec. until the small M above ZOOM disappears.

Other camera/lens combinations

Press the ' button and adjust the zoom-head position manually to match the focal length of the lens in use.

•The indicator changes each time you press the ' button:

24mm 28mm 35mm 50mm 70mm 85mm

When set manually, a small M appears above the ZOOM on the LCD panel.

—When using a Zoom-Nikkor lens, set the zoom-head position on the SB-28 to correspond to the shortest focal length of the lens (for example, select the 28mm setting when using a Zoom-Nikkor 28-85mm lens). Then, the flash will cover all the focal lengths.

20