Nikon SB-28 instruction manual Close-upflash operation in TTL Auto Flash t Mode

Close-up flash operation in TTL Auto Flash t Mode

7Move the SB-28 off axis, making sure the subject will receive sufficient illumination.

•In 3D Multi-Sensor Balanced Fill-Flash mode with cameras in Group I, you may not be able to obtain correct exposure because distance information from the lens (D-type Nikkor) is used. In this case, position the camera and SB-28 at equal distances from the subject.

8Wait for the ready-light to come on and make sure the subject is in focus before taking the picture.

•If the ready-light blinks for approx. 3 seconds after shooting, this indicates the light may have been insufficient for correct exposure. In this case, use a wider aperture or move closer to the subject.

•Correct exposure cannot be obtained if the subject is predominantly black or white or contains a highly reflective surface. In that case, make exposure compensation according to the shooting conditions.

(See pages 71-75, Exposure compensation in flash photography, to ensure correct exposure.)

64