Seagate ST9608210AS manual Serial ATA Sata interface, Serial ATA connector pin definitions, Signal

Page 31

4.0Serial ATA (SATA) interface

These drives use the industry-standard Serial ATA interface that supports FIS data transfers. It supports ATA programmed input/output (PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–6. The drive also supports the use of the IORDY signal to provide reliable high-speed data transfers.

For detailed information about the Serial ATA interface, refer to the “Serial ATA: High Speed Serialized AT Attachment” specification.

4.1Hot-Plug compatibility

Momentus 5400.3 PSD SATA drives incorporate connectors which enable you to hot plug these drives in accordance with the Serial ATA: High Speed Serialized AT Attachment specification revision 2.0. This specifi- cation can be downloaded from http://www.serialata.org. This device requires a COMRESET from the host after a hotplug event.

4.2Serial ATA device plug connector pin definitions

Table 7 summarizes the signals on the Serial ATA interface and power connectors..

Table 7:

Serial ATA connector pin definitions

 

 

 

 

Segment

Pin

Function

Definition

 

 

 

 

 

S1

Ground

2nd mate

 

 

 

 

 

S2

A+

Differential signal pair A from Phy

 

 

 

 

 

S3

A-

 

 

 

 

 

 

S4

Ground

2nd mate

 

 

 

 

 

S5

B-

Differential signal pair B from Phy

 

 

 

 

 

S6

B+

 

Signal

 

 

 

S7

Ground

2nd mate

 

 

 

 

Key and spacing separate signal and power segments

Momentus 5400.3 PSD SATA Product Manual, Rev. A

23

Page 30 Page 32
Image 31
Page 30 Page 32
Contents 100454328 Rev. a Momentus 5400.3 PSD SataPage Rev. a 04/13/07 Initial release Revision status summary sheetRevision Date Momentus 5400.3 PSD Sata Product Manual, Rev. a Contents Momentus 5400.3 PSD Sata Product Manual, Rev. a List of Figures Page Introduction Non-volatile cache NVC About the Serial ATA interfaceImprove performance Improve reliability Provide power savings and battery lifeReduced acoustics Momentus 5400.3 PSD Sata Product Manual, Rev. a Specification summary table Drive specificationsDrive specifications summary Tem will display the warranty information for your drive Cylinders Read/write heads Sectors per track 16,383 Default logical geometryLBA mode Formatted capacityPhysical organization Physical characteristicsRecording and interface technology Typical seek times msec Read Write Seek timeStart/stop times Typical seek timesPower specifications Voltage tolerance Typical current profileDeferred spinup Conducted noiseIdle mode Power-management modesPower management modes Active modeEnvironmental specifications Vibration ShockOperating shock Nonoperating shockRadio frequency environments AcousticsElectromagnetic immunity Drive level acousticsAgency certification Safety certificationMeasurement type Specification ReliabilityAustralian C-Tick N176 Korean RRLFCC verification Corrosive environment Environmental protectionEuropean Union Restriction of Hazardous Substances RoHS Handling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensions-top, side and end viewMomentus 5400.3 PSD Sata Product Manual, Rev. a Segment Pin Function Definition Serial ATA connector pin definitionsSignal Serial ATA Sata interfaceP10 Ground 2nd mate P11 Reserved Pin Function DefinitionCommand name Command code in hex ATA-standard commands Supported ATA commandsATA-standard power-management commands Command name Command code in hexNon-volitile cache commands Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordSet Features command values Set Features commandA.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Technical Support Seagate Technology support servicesInternet Presales SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index ITE Sata Momentus 5400.3 PSD Sata Product Manual, Rev. a Page Seagate Technology LLC

ST91608220AS, ST9608210AS, ST91208220AS, ST9808212AS, ST91008220AS specifications

Seagate is a renowned name in the data storage industry, offering high-quality hard disk drives that cater to various needs. Among its product lineup, the Seagate ST91008220AS, ST9808212AS, ST91208220AS, ST9608210AS, and ST91608220AS are significant models that showcase the company’s commitment to innovation and performance.

The ST91008220AS is a 1TB drive with a 7200 RPM rotational speed, designed primarily for desktop computers. Its SATA 3 Gb/s interface facilitates faster data transfer rates, making it ideal for users who require additional storage without sacrificing performance. The drive’s 32 MB cache enhances read and write speeds, ensuring swift access to files and applications.

Next in line, the ST9808212AS is also a 7200 RPM drive, but it offers a capacity of 80GB. This model is tailored more for entry-level systems, where space is limited but reliability is crucial. With its efficient data management features, it provides a robust solution for everyday computing tasks.

The ST91208220AS offers a balanced combination of performance and capacity, packing 120GB of storage into a similar 7200 RPM design. This model is well-suited for general use in both desktop and gaming environments, providing ample space for operating systems, applications, and games without compromising on speed.

For users seeking a high-performance option, the ST9608210AS stands out with its 600GB storage capacity. With a rotation speed of 10000 RPM, this drive is tailored for demanding applications such as video editing and gaming, where fast access to data is essential. Its SAS interface allows for even more efficient data management in enterprise environments.

Lastly, the ST91608220AS is another 160GB option, also designed for environments that demand high performance. This drive's enhanced reliability features, such as error correction and thermal management, allow it to excel in heavy-use conditions.

All these models include key technologies like Seagate’s SmartAlign, which helps users transition to advanced formatting with ease, and Adaptive Differential Encoding, enhancing data integrity. Additionally, these drives support a variety of platforms and systems, making them versatile options for consumers and businesses alike.

In summary, the Seagate ST91008220AS, ST9808212AS, ST91208220AS, ST9608210AS, and ST91608220AS are primed for diverse storage needs, delivering excellent performance and reliability across different applications and environments. Their combination of rotational speeds, cache sizes, and advanced technologies ensures that Seagate remains a leader in the hard drive market.
Top Page Image Contents