Seagate ST91608220AS, ST9808212AS manual Pin Function Definition, P10 Ground 2nd mate P11 Reserved

Page 32

Table 7:

Serial ATA connector pin definitions

 

 

 

 

Segment

Pin

Function

Definition

 

 

 

 

 

P1

V33

3.3V power

 

P2

V33

3.3V power

 

P3

V33

3.3V power, pre-charge, 2nd mate

 

P4

Ground

1st mate

 

 

 

 

 

P5

Ground

2nd mate

 

 

 

 

 

P6

Ground

2nd mate

 

 

 

 

 

P7

V5

5V power, pre-charge, 2nd mate

 

 

 

 

 

P8

V5

5V power

Power

 

 

 

P9

V5

5V power

 

 

 

 

 

 

P10

Ground

2nd mate

 

 

 

 

 

P11

Reserved

The pin corresponding to P11 in the backplane receptacle connector is also reserved

 

 

 

The corresponding pin to be mated with P11 in the power cable receptacle connector

 

 

 

shall always be grounded

 

 

 

 

 

P12

Ground

1st mate.

 

 

 

 

 

P13

V12

12V power, pre-charge, 2nd mate

 

P14

V12

12V power

 

P15

V12

12V power

Notes:

1.All pins are in a single row, with a 1.27 mm (0.050”) pitch.

2.The comments on the mating sequence apply to the case of backplane blindmate connector only. In this case, the mating sequences are:

•the ground pins P4 and P12.

•the pre-charge power pins and the other ground pins.

•the signal pins and the rest of the power pins.

3.There are three power pins for each voltage. One pin from each voltage is used for pre-charge when installed in a blind-mate backplane configuration.

4.All used voltage pins (Vx) must be terminated.

24

Momentus 5400.3 PSD SATA Product Manual, Rev. A

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Momentus 5400.3 PSD Sata 100454328 Rev. aPage Revision Date Revision status summary sheetRev. a 04/13/07 Initial release Momentus 5400.3 PSD Sata Product Manual, Rev. a Contents Momentus 5400.3 PSD Sata Product Manual, Rev. a List of Figures Page Introduction Improve performance About the Serial ATA interfaceNon-volatile cache NVC Reduced acoustics Provide power savings and battery lifeImprove reliability Momentus 5400.3 PSD Sata Product Manual, Rev. a Drive specifications summary Drive specificationsSpecification summary table Tem will display the warranty information for your drive Default logical geometry LBA modeFormatted capacity Cylinders Read/write heads Sectors per track 16,383Recording and interface technology Physical characteristicsPhysical organization Seek time Start/stop timesTypical seek times Typical seek times msec Read WritePower specifications Typical current profile Deferred spinupConducted noise Voltage tolerancePower-management modes Power management modesActive mode Idle modeEnvironmental specifications Shock Operating shockNonoperating shock VibrationAcoustics Electromagnetic immunityDrive level acoustics Radio frequency environmentsSafety certification Measurement type SpecificationReliability Agency certificationFCC verification Korean RRLAustralian C-Tick N176 European Union Restriction of Hazardous Substances RoHS Environmental protectionCorrosive environment Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingMomentus 5400.3 PSD Sata Product Manual, Rev. a Serial ATA connector pin definitions SignalSerial ATA Sata interface Segment Pin Function DefinitionPin Function Definition P10 Ground 2nd mate P11 ReservedSupported ATA commands Command name Command code in hex ATA-standard commandsCommand name Command code in hex ATA-standard power-management commandsNon-volitile cache commands Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordSet Features command Set Features command valuesCode in features register A.R.T. command 3 S.M.A.R.T. commandsA.R.T. commands Seagate Technology support services InternetPresales Support Technical SupportData Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index ITE Sata Momentus 5400.3 PSD Sata Product Manual, Rev. a Page Seagate Technology LLC

ST91608220AS, ST9608210AS, ST91208220AS, ST9808212AS, ST91008220AS specifications

Seagate is a renowned name in the data storage industry, offering high-quality hard disk drives that cater to various needs. Among its product lineup, the Seagate ST91008220AS, ST9808212AS, ST91208220AS, ST9608210AS, and ST91608220AS are significant models that showcase the company’s commitment to innovation and performance.

The ST91008220AS is a 1TB drive with a 7200 RPM rotational speed, designed primarily for desktop computers. Its SATA 3 Gb/s interface facilitates faster data transfer rates, making it ideal for users who require additional storage without sacrificing performance. The drive’s 32 MB cache enhances read and write speeds, ensuring swift access to files and applications.

Next in line, the ST9808212AS is also a 7200 RPM drive, but it offers a capacity of 80GB. This model is tailored more for entry-level systems, where space is limited but reliability is crucial. With its efficient data management features, it provides a robust solution for everyday computing tasks.

The ST91208220AS offers a balanced combination of performance and capacity, packing 120GB of storage into a similar 7200 RPM design. This model is well-suited for general use in both desktop and gaming environments, providing ample space for operating systems, applications, and games without compromising on speed.

For users seeking a high-performance option, the ST9608210AS stands out with its 600GB storage capacity. With a rotation speed of 10000 RPM, this drive is tailored for demanding applications such as video editing and gaming, where fast access to data is essential. Its SAS interface allows for even more efficient data management in enterprise environments.

Lastly, the ST91608220AS is another 160GB option, also designed for environments that demand high performance. This drive's enhanced reliability features, such as error correction and thermal management, allow it to excel in heavy-use conditions.

All these models include key technologies like Seagate’s SmartAlign, which helps users transition to advanced formatting with ease, and Adaptive Differential Encoding, enhancing data integrity. Additionally, these drives support a variety of platforms and systems, making them versatile options for consumers and businesses alike.

In summary, the Seagate ST91008220AS, ST9808212AS, ST91208220AS, ST9608210AS, and ST91608220AS are primed for diverse storage needs, delivering excellent performance and reliability across different applications and environments. Their combination of rotational speeds, cache sizes, and advanced technologies ensures that Seagate remains a leader in the hard drive market.
Top Page Image Contents