Mitsubishi Electronics LT-40133 manual TV Front Panel, Indicator Lights

1. Television Overview

NetCommand for HDMI Devices (all models)

Some newer HDMI devices may be compatible with the TV’s NetCommand for HDMI feature. Compatible devices can receive control signals through the HDMI connection. The TV’s remote control may be able to operate some functions of these devices without any further setup. See “HDMI Inputs” and “HDMI Cable Categories” on page 12 for more information on HDMI. See Appendix D for TV Remote programming informa- tion.

Note: On models LT-40134, LT-46144, and LT-52144, you can add commands using NetCommand IR emit- ters and “Learning.”

Front Panel Indicators

1.POWER/TIMER indicator. Lit when TV is powered on; flashes when TV is powered off and the auto-on TV Timer is set; flashes rapidly (approx. 60 sec.) when TV is first plugged in to an AC outlet.

2.STATUS indicator (off during normal TV operation); indicates TV may need service.

TV Front Panel

Indicator Lights

Side Panel

(Controls and Inputs)

Remote

Control

Sensors

Power and Status Lights

Lights (located on the front left) indicate whether the TV is on or off, a timer is set, and the overall functional status of the TV. See chapter 4, “TV Operation and Features,” for more information.

POWER/TIMER Indicator		Off	Steady On	Slow Blinking	Fast Blinking
LED Color	TV Condition	Additional Information
None	Standby condition.	Normal operation.
Blue	TV is powered on.	Normal operation.
Blue	TV powered off, auto-on timer is	Normal operation. TV can be turned on at any time.
	set.

Blue 1. TV just plugged into AC outlet.

2.AC just restored after power failure.

3.TV rebooting after System Reset used.

4.TV rebooting after power fluc- tuation or receiving abnormal digital signals from a digital channel or digital device.

5.You have begun the procedure to update software from an authorized flash memory device.

Wait approximately one minute for blinking to stop before turning on. Normal operation.

STATUS Indicator

LED Color	TV Condition	Additional Information
None	Normal TV on or standby condition.	Normal operation.
Red	TV may require service.	Turn off the TV and unplug the set from the AC power source.
		Wait one minute and then plug the set back in. See Appendix E.
		If the LED is still on, contact your dealer or a Mitsubishi
		Authorized Service Center. Go to www.mitsubishi-tv.com or call
		1-800-332-2119 to receive Authorized Service Center information.