Mitsubishi Electronics LT-40133 manual Setting Up TV Inputs, Change the Menu Language

2. TV Setup 15

Initial TV Setup, continued

Change the Menu Language

Choose to display on-screen menus in either English or Spanish (Español).

Select a menu language in the Setup menu.

1. With the Setup menu displayed, press to high- light the Language icon.

2.Pressto highlight either English or Spanish.

3.Press MENU to return the highlight to the top row of icons.

Scan “Memorize” Channels (For ANT 1/MAIN

and ANT 2/AUX)

The TV can automatically “find and memorize” available channels on ANT 1 and ANT 2 inputs using the channel scan function.

To start channel scan

1. With the Setup menu displayed, press to high- light the Scan icon.

2.Pressto highlight an input selection based on your connections:

Input	Condition
Ant 1 Air	When connected to an indoor or
Ant 2 Air	outdoor antenna
Ant 1 Cable	When connected to direct cable (no
Ant 2 Cable	cable box)

3.Press to highlight the on-screen START button.

4.Press ENTER to start automatic channel setup. To stop channel scan, press CANCEL.

Start channel memorization from the Setup menu.

5.When memorization is complete you can:

•Press MENU once to return to the top row of icons.

•Press MENU again to return to the Main menu.

•Press EXIT to watch TV.

After channels have been scanned “memorized”:

• To tune to memorized channels, press CH/PAGE  / while watching TV on the ANT 1 or ANT 2 inputs.

•Use the Setup > Edit menu for additional channel options, such as adding or deleting channels from memory, naming channels, and saving favorite channels in custom memory banks.

Additional TV Setup Using the Setup Menu

See chapter 5, “TV Menu Settings,” to :

•Edit channel options

•Set the TV clock

•Set the TV Timer

•Select an Energy Mode to manage power use while the TV is off.

Setting Up TV Inputs

When You First Connect a Device

This TV’s Easy Connect™ Auto Input Sensing feature detects most connections automatically. When you first connect a device, the TV will:

a.detect the connected device

b.prompt you to identify the device type

c.prompt you to perform NetCommand set-up for the device (LT-40134, LT-46144, and LT-52144 models only)

d.repeat these steps for any additional newly detected devices

The tables below clarify which connections trigger Auto Input Sensing.

Auto Detection Active	No Auto Detection
INPUT 1, 2, 3 (video)	ANT 1 and ANT 2
COMPONENT 1, 2, 3 (video)
HDMI* 1, 2, 3, (4 on LT-40134
model only)
Digital Audio OutPUT
AVR AUDIO OUTPUT (analog)
USB (USB photo port on side)

*If the device is powered off when connected, detec- tion occurs when the device is next powered on.

Note: For connection and setup of a personal com- puter, see the information later in this chapter.