Mitsubishi Electronics LT-40133 manual About NetCommand

50

6 NetCommand

About NetCommand

•This chapter applies to LT-40134, LT-46144, and LT-52144 models only.

•The IR “Learning” feature of NetCommand allows the TV to learn the remote control signals for your A/V devices

•NetCommand setup is optional.

•You can perform NetCommand setup when the TV first recognizes a device during Auto Input Sensing or at any convenient time afterward.

•NetCommand operates by sending remote control signals from the TV to your other devices via the IR emitters, telling the devices to play, record, change inputs, adjust volume, change channels and many more functions. All this is accomplished with the TV’s remote control and the slide switch left in the TV position.

•You can choose the level of NetCommand control for your home theater.

Standard Setup. Perform a standard setup if you want NetCommand to control only a few devices, such as the TV, a playback device (like a DVD player), and a cable box. With this setup, you can use the TV’s remote control to operate these devices.

A/V Receiver Setup. Perform A/V receiver setup if you want NetCommand to:

Control a surround sound A/V receiver.

Automatically change audio input selec- tions on an A/V receiver when you change inputs on the TV.

IMPORTANT

Be sure to connect the IR emitter cable to the TV and properly place the emitters so that Netcommand can control your devices. See the explanation on the following page.