Appendices67

Appendix C: TV Guide Daily

Modify Guide Setup

From the Guide Setup screen, you can change channel lineup, change channel display settings, and view setup progress (e.g., when the next listings update will occur).

To select channel lineup:

You can view or change (if more than one available) the channel lineup, using the following procedure:

While in the Guide Listings, press MENU. This displays the Setup Screen.

Press   to highlight “Change channel lineup”

 

and press ENTER. A selection screen appears.

Make lineup selection:

-If only one selection is available, Next will be highlighted, press ENTER.

-If more than one selection is available, but you want to use the one already selected (check- marked), press ENTER.

-If more than one selection is available and you

want to select a different lineup, press

to

move highlight back to selections. Press

to move highlight to desired lineup and press ENTER to select your choice (add checkmark). Press to highlight Next and press ENTER.

A confirmation screen appears.

In the confirmation screen, verify lineup selection:

-If selection is correct, press ENTER to select

“Yes” (add checkmark), press

to highlight

Next, and then press ENTER.

 

- If selection is not correct, press

to highlight,

“No,” press ENTER to select (add checkmark),

press

to highlight Next, and then press ENTER

to return to the Make Lineup Selection screen.

Note: You may have to select several lineup options before you receive the correct one for your area. To edit a specific tune channel number in the Listings grid, see “To Modify Channel Settings” below.

To modify channel settings:

You can edit how channels appear in the Guide Listing (reorder their position, change their display setting, and change their tune channel). Note: The default settings

for each channel are determined by the transmitted data received by your TV.

Available Options:

Position - order of the channel in the Listings.

Channel - determines whether or not the channel is displayed in the Listings (On, Auto-hide, and Off). Auto-hide displays channels only when show information is available.

Tune Channel - shows the channel number that displays in the Listings and which channel number is used when tuning to that channel.

Procedure:

While in the Guide Listings, press MENU. This displays the Setup Screen.

Highlight “Change channel display” and press ENTER. The channel editor screen appears.

Use   to highlight desired row setting to be changed.

-To change channel position (Channel No.

highlighted), press

  to move position or

enter a new channel position number. When

correct, press  

to move highlight to another

position on grid to save changes.

-To change channel display status (status tile highlighted - next to channel number), repeat- edly press ENTER to cycle through choices (on,

auto, off). When correct, press   to move highlight to another position on grid to save changes.

-To change tune channel number* (Channel Tune No. highlighted - far right), enter desired number with remote control number keys (—/CANCEL key for digital sub-channel separator).

When correct, press   to move highlight to another position on grid to save changes.

*Note: If you receive both analog and digital versions of the same channel, do not change the tune channel number of the digital channel to match the analog station - this may hinder the ability of the Guide to receive data. Instead, locate the digital station in the channel editor and, if necessary, change the channel row position to a location you prefer.

You can also hide the analog channel (turn off) so it does not appear in the listings (see “To change Channel Display Status above”).

Page 67
Image 67
Mitsubishi Electronics LT-40133 manual Modify Guide Setup, Available Options, Procedure