Mitsubishi Electronics LT-40133 manual Before you Begin

3 TV Connections

19

Before you Begin

Auto Input Sensing

The TV’s Auto Input Sensing feature automatically rec- ognizes most connections and prompts you to identify the type of device connected. See chapter 2, “TV Setup,” for more on Auto Input Sensing.

Connection Types

Review the connection types available on your input devices and use inputs that will give the best video quality. For example, choose HDMI over component video, and choose component video over S-video or composite video.

Picture Quality

For best picture quality, route signals directly from the source device to the TV; avoid routing video signals through an A/V receiver, for example.

Sound Quality

For best surround sound audio quality, route audio signals from the source device directly to your A/V receiver or sound system whenever possible.

IMPORTANT

Accessory items such as cables, adapters, splitters, or combiners required for TV connections are not supplied with the TV. These items are available at many electronics stores.

HDTV Cable Box or Satellite Receiver with Component Video

If your cable box or satellite receiver has an HDMI output, use the connections for HDMI devices described later in this chapter.

Required: RCA component video cables, left/right analog stereo audio cables.

1.Connect the cable from the outside cable or satel- lite service to CABLE IN or SATELLITE IN on the cable box or satellite receiver. See your device’s owner’s guide for instructions and cable compat- ibility.

2.Connect RCA-type cables from the Y Pb Pr outputs on the HDTV cable box or satellite receiver to Component INPUTS on the TV back panel #1, matching the colored green, blue, and red connections.

3.Connect left (white) and right (red) audio cables from the HDTV cable box or satellite receiver to Component INPUTS L (MONO) and R on the TV back panel #1.

Note: To hear digital surround sound, connect the digital audio output from your cable box or satellite re-



*ODPNJOH
GSPN
$BCMF
4FSWJDF
PS
4BUFMMJUF
%JTI

57
#BDL
1BOFM


$"#-& */ PS	"6%*0
4"5&--*5& */
: 1C 1S	- 3
$BCMF #PY 	
PS 4BUFMMJUF
3FDFJWFS






$0.10/&/5

*/1654

*/1654

JQQJ

ceiver directly to your digital A/V receiver.

Figure 1. Connecting an external HDTV receiver with component video connections