284. TV Operation and Features

Remote Control

1.POWER: Turns TV power on and off.

2.Slide Switch: Selects the A/V device to be con- trolled by the remote control. Set the slide switch to TV for operation of the TV and NetCommand- controlled devices. Control of additional devices requires programing (see Appendix D, “Program- ming the Remote Control.”

3.SLEEP: Sets the TV to turn off within 2 hours.

4.Digits/Letters: Press digits for channel numbers,

then press ENTER for faster tuning. Use numbers and the key to enter digital sub-channel numbers.

CANCEL

Use also for entering letters or names into menus.

To select letters when naming channels, repeatedly press the associated number key. Press ENTER to set the letter. Special characters are available with the 1 key (!, &, blank space) and 0 key (/ , * , -).

5.—/CANCEL (SUB-Channel/CANCEL): Adds a separator between main and sub-channel numbers for digital channels. Clears Fav and some menu entries.

6.QV (QuickView™): Switches between the current channel and the last channel viewed.

7.MUTE: Turns TV sound on and off.

8.SPLIT: Not used.

9.Fav (Favorites): Scans through memorized lists of favorite channels. See “Setup Menu” in chapter 5,

“TV Menu Settings,” for more information.

10.VOL  /  (Volume Up/Down): Changes sound level.

11.CH/PAGE  /  (Channel or Page Up/Down): Scans up or down through memorized channels. Pages up and down through screens when used with the TV Guide Daily system (model LT-40134 only) or ChannelView™.

12.FORMAT: Changes the shape and size of the TV picture.

13.INPUT: Displays the Input Selection menu from which you can select an input source to view, such as an antenna (ANT 1/ANT 2) or a connected device.

14. (Adjust Up/Down/Left/Right): Navigate menus and change settings.

15.ENTER: Selects a channel number or menu item.

16.AUDIO: Selects individual audio settings to adjust.

17.VIDEO: Selects individual video settings to adjust.

18.GUIDE: Displays or closes ChannelView™ (or TV Guide Daily - if enabled on model LT-40134) channel listing for ANT 1 and ANT 2. Displays DVD disc or top menu for a NetCommand-controlled DVD player.

Low-Battery Indicator

If you press a key and the POWER key blinks five times, replace the remote control’s batteries.

 

 

2

 

 

 

3

1

 

 

4

 

 

 

5

 

 

 

 

6

7

8

9

 

 

 

 

12

 

10

11

13

 

 

 

 

 

 

14

 

 

16

15

 

 

17

 

 

 

18

20

 

 

19

 

 

21

 

 

 

 

25

26

23

 

27

28

24

 

 

 

22

19.INFO: Displays an on-screen summary of the current device in use and any broadcast information avail- able, including current V-Chip ratings information.

See chapter 4, “TV Operation and Features.”

20.MENU: Displays the main TV menu using the on- screen menu system. When a sub-menu is open, backs up one menu level.

21.EXIT: Closes TV on-screen menus/displays.

22. F1–F4

For devices under NetCommand control: Perform NetCommand “Learning” to assign your choice of functions to the F1F4 keys.

For devices operating independently of NetCommand: The F1F4 keys work like the A, B, C, D buttons on some cable boxes, satellite receivers, and DVD players. Program the remote control for your equipment and test the keys. See Appendix D, “Programming the Remote Control.”

23. (Pause): Freezes a broadcast TV picture. See next page for use with recording devices (VCR, DVD, DVR, etc.).

Page 28
Image 28
Mitsubishi Electronics LT-40133 manual Remote Control, Low-Battery Indicator