Mitsubishi Electronics LT-40133 manual Inputs Menu Options, DVD, DVD2, Vcr, Pc, Avr

5. TV Menu Settings 45

Inputs Menu

Note:

•NetCommand IR control of home theater devices is available on

LT-40134, LT-46144, and LT-52144 models only.

•When you change an input name in the Name menu and then exit the Name menu:

The name is changed

The icon in the Input Selection menu is changed Audio/Video settings are changed to the defaults for the new device type.

On models offering NetCommand control, all “learning” for the input is also erased.

Change input names using the Inputs > Name menu.

Inputs Menu Options

	Cable Box,		• Assign or change names of inputs appearing in the Input Selection
Name	Camcorder,			menu.
	DVD, DVD2,		• Turn ANT 1 and ANT 2 On or Off.
	DVR, Game, HD		• Turn unused HDMI inputs Off.
	Disc, Satellite,		•	Press	to move between inputs.
	VCR, PC,		•	Press	to select a name.
	On/Off (ANT 1		• If you change the name of an input after performing NetCommand
	and 2 only)			“learning,” the IR codes you “learned” are erased.
	Off (HDMI only)		Note: When you disconnect an HDMI device, the icon remains in the Input
			Selection menu until you remove it. To remove an unwanted HDMI icon,
			select Off for the HDMI input.
	Put frequently used icons at the start of the Input Selection menu.
Order	1.	Press	to highlight the icon to move.
	2.	Press ENTER to confirm the selection.

3.Press to drag the icon to the desired position.

4.Press ENTER to set the new position.

	LT-40134, LT-46144, and LT-52144 models only
Learn	• Perform initial set-up of NetCommand control of a device.
	• Add or remove individual keys from NetCommand control of a device.
	See detailed instructions in chapter 6, “NetCommand.”

	LT-40134, LT-46144, and LT-52144 models only
AVR	Set up NetCommand control of an A/V receiver. This set-up allows you to:
	• Operate the A/V receiver’s power and volume functions with the TV’s remote control.
	• Make the A/V receiver switch automatically to the correct audio input when you select a
	device in the TV’s Input Selection menu.
	See detailed instructions in chapter 6, “NetCommand.”
	Guide	On/Off	Enable/disable or setup TV Guide Daily
Guide	Devices	Ant-1, Ant-2	See instructions on the following page.
(model
	Zip Code	[5-digit ZIP	See chapter 5, “Setup Menu Options - Energy” for infor-
LT-40134 only)		code]	mation on Energy Mode settings for TV Guide Daily.