Seagate ST9120315AS, ST980313ASG, ST9500325AS manual Drive specifications for 250 and 160 GB models

Table 2:	Drive specifications for 250 and 160 GB models
		ST9250315AS	ST9160314AS
Drive specification		ST9250315ASG	ST9160314ASG	ST9160301AS
Altitude, nonoperating		–304.8 m to 12,192 m (–1000	ft to 40,000+ ft)
(meters below mean sea level, max)
Shock, operating (Gs max at 2 msec)		350
Shock, nonoperating (Gs max at 2 msec)		800
Shock, nonoperating (Gs max at 1 msec)		1,000
Shock, nonoperating (Gs max at 0.5 msec)		600
Vibration, operating		1.0 G (0 to peak, 5–500 Hz)
Vibration, nonoperating		5.0 Gs (0 to peak, 5–500 Hz)
Drive acoustics, sound power (bels)
Idle**		2.4 (typical)		2.0 (typical)
		2.6 (max)		2.2 (max)
Performance seek		2.6 (typical)		2.5 (typical)
		2.7 (max)		2.6 (max)
Nonrecoverable read errors		1 per 1014 bits read
Annualized Failure Rate (AFR)		0.48%
Load/Unload (U/UL) cycles
25°C, 50% relative humidity		600,000 software-controlled power on/off cycles
		20,000 hard power on/off cycles
32°C, 80% relative humidity		600,000 software-controlled power on/off cycles
5°C, 80% relative humidity		20,000 hard power on/off cycles
5°C, 10% relative humidity
55°C, 16% relative humidity
Warranty		To determine the warranty for a specific drive, use a web browser to access the following
		web page: support.seagate.com/customer/warranty_validation.jsp
		You will be asked to provide the drive serial number, model number (or part number) and
		country of purchase. After submitting this information, the system will display the war-
		ranty information for your drive.
Supports Hotplug operation per Serial ATA		Yes (requires COMRESET from host after a hotplug event)
Revision 2.6 specification

see notes after Table 3..

6 Momentus 5400.6 SATA Product Manual, Rev. E