Seagate ST9320325AS, ST980313ASG, ST9500325ASG, ST9400326AS manual Environmental specifications

Page 20

2.10Environmental specifications

2.10.1Ambient temperature

Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Actual drive case temperature should not exceed 70°C (158°F) within the operating ambient conditions.

Above 1,000 feet (305 meters), the maximum temperature is derated linearly by 1°C every 1000 feet.

Operating:

0° to 60°C (32° to 140°F)

 

 

Nonoperating:

–40° to 70°C (–40° to 158°F)

 

 

2.10.2Temperature gradient

Operating

20°C per hour (68°F per hour max), without condensation

 

 

Nonoperating

35°C per hour (95°F per hour max), without condensation

 

 

2.10.3Humidity

2.10.3.1Relative humidity

Operating

5% to 95% noncondensing (30% per hour max)

 

 

Nonoperating

5% to 95% noncondensing (30% per hour max)

 

 

2.10.3.2Wet bulb temperature

Operating

37.7°C (99.86°F max)

 

 

Nonoperating

40°C (104°F max)

 

 

2.10.4Altitude

Operating

–304.8 m to 3,048 m (–1,000 ft to 10,000+ ft)

 

 

Nonoperating

–304.8 m to 12,192 m (–1,000 ft to 40,000+ ft)

 

 

14

Momentus 5400.6 SATA Product Manual, Rev. E

Image 20
Contents Momentus 5400.6 Sata Page Contents Momentus 5400.6 Sata Product Manual, Rev. E List of Figures Page Introduction About the Serial ATA interface Drive specifications for 500, 400 and 320 GB models Drive specificationsSpecification summary table Revision 2.6 specification See notes after Table Drive specifications for 250 and 160 GB models Drive specifications for 250 and 160 GB models Drive specifications for 120 and 80 GB models Formatted Guaranteed Bytes per Model Capacity Sectors Formatted capacityDefault logical geometry LBA modePhysical organization Recording and interface technologyPhysical characteristics Seek timeStart/stop times Typical seek timesPower specifications Typical current profile Deferred spinupConducted noise Voltage tolerancePower-management modes Power management modesActive mode Idle modeEnvironmental specifications Shock Operating shockNonoperating shock VibrationDrive A-weighted Sound Power Levels SWL, BA AcousticsElectromagnetic immunity Test for Prominent Discrete Tones PDTsReliability Free Fall Protection featureMeasurement type Specification Safety certification Agency certificationElectromagnetic compatibility Korean RRLFCC verification Environmental protection Corrosive environmentEuropean Union Restriction of Hazardous Substances RoHS China Restriction of Hazardous Substances RoHS DirectiveConfiguring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsDrive mounting Top cover stiffness/deflectionMeasurements shown in are in inches Serial ATA connector pin definitions SignalSerial ATA Sata interface Segment Pin Function DefinitionPin Function Definition P10 Ground 2nd mate P11 ReservedSupported ATA commands Command name Command code in hex ATA-standard commandsCommand name Command code in hex ATA-standard security commandsIdentify Device command Word Description ValueXxxxH Description if bit is set to Bit Momentus 5400.6 Sata Product Manual, Rev. E Set Features command Set Features command valuesCode in features register A.R.T. command 3 S.M.A.R.T. commandsM.A.R.T. commands Technical Support Seagate Technology support servicesPresales Support Data Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index Page Page Momentus 5400.6 Sata Product Manual, Rev. E Page Seagate Technology LLC
Related manuals
Manual 48 pages 57.09 Kb