Seagate ST9160314ASG Agency certification, Safety certification, Electromagnetic compatibility

Page 24

2.14Agency certification

2.14.1Safety certification

The drives are recognized in accordance with UL 1950 and CSA C22.2 (950) and meet all applicable sections of IEC950 and EN 60950 as tested by TUV North America.

2.14.2Electromagnetic compatibility

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Elec- tromagnetic Compatibility Directive (89/336/EEC). Testing is performed to the levels specified by the product standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are defined by EN 55024.

Seagate uses an independent laboratory to confirm compliance with the EC directives specified in the previous paragraph. Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products.

Korean RRL

If these drives have the Korea Ministry of Information and Communication (MIC) logo, they comply with para- graph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Radio Research Laboratory (RRL) Ministry of Information and Communication Republic of Korea.

These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibil- ity (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recog- nized lab.

•Certificate number: STX-54006 (B)

•Trade name or applicant: Seagate Technology LLC

•Manufacturing date: October 01, 2008 (Date of Certification)

•Manufacturer/nationality: USA, Singapore and China

Australian C-Tick (N176)

If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZS3548 1995 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communi- cation Authority (ACA).

18

Momentus 5400.6 SATA Product Manual, Rev. E

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Momentus 5400.6 Sata Page Contents Momentus 5400.6 Sata Product Manual, Rev. E List of Figures Page Introduction About the Serial ATA interface Drive specifications Specification summary tableDrive specifications for 500, 400 and 320 GB models Revision 2.6 specification See notes after Table Drive specifications for 250 and 160 GB models Drive specifications for 250 and 160 GB models Drive specifications for 120 and 80 GB models Formatted Guaranteed Bytes per Model Capacity Sectors Formatted capacityDefault logical geometry LBA modePhysical organization Recording and interface technologyPhysical characteristics Seek timeStart/stop times Typical seek timesPower specifications Typical current profile Deferred spinupConducted noise Voltage tolerancePower-management modes Power management modesActive mode Idle modeEnvironmental specifications Shock Operating shockNonoperating shock VibrationDrive A-weighted Sound Power Levels SWL, BA AcousticsElectromagnetic immunity Test for Prominent Discrete Tones PDTsFree Fall Protection feature Measurement type SpecificationReliability Safety certification Agency certificationElectromagnetic compatibility Korean RRLFCC verification Environmental protection Corrosive environmentEuropean Union Restriction of Hazardous Substances RoHS China Restriction of Hazardous Substances RoHS DirectiveConfiguring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsDrive mounting Top cover stiffness/deflectionMeasurements shown in are in inches Serial ATA connector pin definitions SignalSerial ATA Sata interface Segment Pin Function DefinitionPin Function Definition P10 Ground 2nd mate P11 ReservedSupported ATA commands Command name Command code in hex ATA-standard commandsCommand name Command code in hex ATA-standard security commandsIdentify Device command Word Description ValueXxxxH Description if bit is set to Bit Momentus 5400.6 Sata Product Manual, Rev. E Set Features command Set Features command values3 S.M.A.R.T. commands M.A.R.T. commandsCode in features register A.R.T. command Seagate Technology support services Presales SupportTechnical Support Warranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Index Page Page Momentus 5400.6 Sata Product Manual, Rev. E Page Seagate Technology LLC
Related manuals
Manual 48 pages 57.09 Kb
Top Page Image Contents