Seagate ST96023A, ST980825A, ST94015A, ST910021A manual Environmental specifications

Page 17

2.10Environmental specifications

2.10.1Ambient temperature

Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Actual drive case temperature should not exceed 65°C (149°F) within the operating ambient conditions.

Above 1,000 feet (305 meters), the maximum temperature is derated linearly by 1°C every 1000 feet.

Operating: 5° to 55°C (41° to 131°F)

Nonoperating: –40° to 70°C (–40° to 158°F)

2.10.2Temperature gradient

Operating:	20°C per hour (68°F per hour max), without condensation

Nonoperating:	30°C per hour (86°F per hour max)

2.10.3Humidity

2.10.3.1Relative humidity

Operating: 8% to 90% noncondensing (30% per hour max)

Nonoperating: 5% to 95% noncondensing (30% per hour max)

2.10.3.2Wet bulb temperature

Operating:	30°C	(86°F max)

Nonoperating:	40°C	(104°F max)

2.10.4Altitude

Operating:	–304.8 m to 3,048 m (–1,000 ft to 10,000+ ft)

Nonoperating:	–304.8 m to 12,192 m (–1,000 ft to 40,000+ ft)

Momentus 7200.1 PATA Product Manual, Rev. C

11

Image 17

Contents ST910021A ST980825A ST96023A ST94015A Momentus 7200.1 PataPage Contents Momentus 7200.1 Pata Product Manual, Rev. C List of Figures Momentus 7200.1 Pata Product Manual, Rev. C Momentus 7200.1 Pata disc drive IntroductionMomentus 7200.1 Pata Product Manual, Rev. C Specification summary Drive specificationsSpecifications Drive specification ST910021A ST980825A ST96023A ST94015A+5V ± 5% / -8% startup LBA mode Default logical geometryFormatted capacity Physical organizationRecording and interface technology Physical characteristicsTechnology Specification Time to ready Seek timeTypical seek times msec Read Write Time to ready Typical Max Power specifications Voltage tolerance Typical current profileConducted noise Power management modes Power-management modesActive mode Idle modeEnvironmental specifications Operating shock ShockNonoperating shock VibrationElectromagnetic immunity AcousticsDrive level acoustics Electromagnetic immunityMeasurement type Specification Safety certificationReliability Agency certificationFCC verification Korean RRLAustralian C-Tick N176 European Union Restriction of Hazardous Substances RoHS Environmental protection表示该部件（于同类物品程度上）所含的危险和有毒物质超出中国 Momentus 7200.1 Pata Product Manual, Rev. C Handling and static discharge precautions Configuring and mounting the driveJumper settings Master/slave configurationCable-select option Drive mountingConnector signals ATA interface signals and connector pinsConnector Cable Signal Name Contact Conductor Cable Connector Conductor Contact Signal NameCommand name Command code in hex ATA-standard commands Supported ATA commandsSupported commands ATA-standard security commands Command name Command code in hexATA-standard power-management commands Supported commands Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordFeatures register values Set Features commandInternet Seagate Technology support servicesPresales Support Technical SupportData Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index Page Page Momentus 7200.1 Pata Product Manual, Rev. C Page Seagate Technology LLC