Seagate ST910021A, ST980825A, ST96023A, ST94015A manual Introduction, Momentus 7200.1 Pata disc drive

Page 7

1.0Introduction

This manual describes the functional, mechanical and interface specifications for the following Seagate® Momentus 7200.1 PATA drives:

•ST910021A

•ST980825A

•ST96023A

•ST94015A

These drives provide the following key features:

•7,200-RPM spindle speed and 8-Mbyte buffer combine for superior performance.

•Quiet operation. Fluid Dynamic Bearing (FDB) motor.

•High instantaneous (burst) data transfer rates (up to 100 Mbytes per second) using Ultra DMA mode 5.

•Tunneling Magnetoresistive (TMR) recording heads.

•State-of-the-art cache and on-the-fly error-correction algorithms.

•Full-track multiple-sector transfer capability without local processor intervention.

•800 Gs nonoperating shock.

•250 Gs operating shock.

•SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns.

•Support for S.M.A.R.T. drive monitoring and reporting.

•Support for Read Multiple and Write Multiple commands.

•Support for autodetection of master/slave drives that use cable select (CSEL).

Figure 1. Momentus 7200.1 PATA disc drive

Momentus 7200.1 PATA Product Manual, Rev. C

1

Image 7

Contents ST910021A ST980825A ST96023A ST94015A Momentus 7200.1 PataPage Contents Momentus 7200.1 Pata Product Manual, Rev. C List of Figures Momentus 7200.1 Pata Product Manual, Rev. C Momentus 7200.1 Pata disc drive IntroductionMomentus 7200.1 Pata Product Manual, Rev. C Drive specification ST910021A ST980825A ST96023A ST94015A Drive specificationsSpecification summary Specifications+5V ± 5% / -8% startup Physical organization Default logical geometryLBA mode Formatted capacityTechnology Specification Physical characteristicsRecording and interface technology Time to ready Typical Max Seek timeTime to ready Typical seek times msec Read WritePower specifications Conducted noise Typical current profileVoltage tolerance Idle mode Power-management modesPower management modes Active modeEnvironmental specifications Vibration ShockOperating shock Nonoperating shockElectromagnetic immunity AcousticsElectromagnetic immunity Drive level acousticsAgency certification Safety certificationMeasurement type Specification ReliabilityAustralian C-Tick N176 Korean RRLFCC verification European Union Restriction of Hazardous Substances RoHS Environmental protection表示该部件（于同类物品程度上）所含的危险和有毒物质超出中国 Momentus 7200.1 Pata Product Manual, Rev. C Master/slave configuration Configuring and mounting the driveHandling and static discharge precautions Jumper settingsCable-select option Drive mountingCable Connector Conductor Contact Signal Name ATA interface signals and connector pinsConnector signals Connector Cable Signal Name Contact ConductorSupported commands Supported ATA commandsCommand name Command code in hex ATA-standard commands ATA-standard power-management commands Command name Command code in hexATA-standard security commands Supported commands Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordFeatures register values Set Features commandTechnical Support Seagate Technology support servicesInternet Presales SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index Page Page Momentus 7200.1 Pata Product Manual, Rev. C Page Seagate Technology LLC