Seagate ST980825A, ST96023A, ST94015A, ST910021A manual Supported ATA commands, Supported commands

Page 28

4.1.1Supported ATA commands

The following table lists ATA-standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Draft ATA-6 Standard..

Table 7:	Supported commands

Command name			Command code (in hex)

ATA-standard commands

ATA Device Configuration Overlay			B1H
ATA Service			A2H
Check Power Mode			98H, E5H
Download Microcode			92H
Execute Device Diagnostics			90H
Flush Cache			E7H
Flush Cache Extended			EAH
Format Track (Legacy)			50H
Identify Device			ECH
Idle			97H, E3H
Idle Immediate			95H, E1H
Initialize Device Parameters			91H
Read Buffer			E4H
Read DMA			C8H, C9H
Read DMA Extended			25H
Read Log Extended			22H
Read Multiple			C4H
Read Multiple Extended			29H
Read Native Max Address			F8H
Read Native Max Address Extended			27H
Read Sectors			20H, 21H
Read Sectors Extended			24H
Read Verify Sectors			40H, 41H
Read Verify Sectors Extended			42H
Recalibrate			10H
Security Disable Password			F6H
Security Erase Prepare			F3H
Security Erase Unit			F4H
Security Freeze Lock			F5H
Security Set Password			F1H

22	Momentus 7200.1 PATA Product Manual, Rev. C

Image 28

Contents Momentus 7200.1 Pata ST910021A ST980825A ST96023A ST94015APage Contents Momentus 7200.1 Pata Product Manual, Rev. C List of Figures Momentus 7200.1 Pata Product Manual, Rev. C Introduction Momentus 7200.1 Pata disc driveMomentus 7200.1 Pata Product Manual, Rev. C Drive specifications Specification summarySpecifications Drive specification ST910021A ST980825A ST96023A ST94015A+5V ± 5% / -8% startup Default logical geometry LBA modeFormatted capacity Physical organizationTechnology Specification Physical characteristicsRecording and interface technology Seek time Time to readyTypical seek times msec Read Write Time to ready Typical MaxPower specifications Conducted noise Typical current profileVoltage tolerance Power-management modes Power management modesActive mode Idle modeEnvironmental specifications Shock Operating shockNonoperating shock VibrationAcoustics Electromagnetic immunityDrive level acoustics Electromagnetic immunitySafety certification Measurement type SpecificationReliability Agency certificationAustralian C-Tick N176 Korean RRLFCC verification Environmental protection European Union Restriction of Hazardous Substances RoHS表示该部件（于同类物品程度上）所含的危险和有毒物质超出中国 Momentus 7200.1 Pata Product Manual, Rev. C Configuring and mounting the drive Handling and static discharge precautionsJumper settings Master/slave configurationDrive mounting Cable-select optionATA interface signals and connector pins Connector signalsConnector Cable Signal Name Contact Conductor Cable Connector Conductor Contact Signal NameSupported commands Supported ATA commandsCommand name Command code in hex ATA-standard commands ATA-standard power-management commands Command name Command code in hexATA-standard security commands Supported commands Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordSet Features command Features register valuesSeagate Technology support services InternetPresales Support Technical SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index Page Page Momentus 7200.1 Pata Product Manual, Rev. C Page Seagate Technology LLC