Seagate ST100FM0012, ST100FM0052, ST100FM0002, ST200FM0012, ST200FM0002 manual General Description

Page 12

3.0GENERAL DESCRIPTION

Pulsar.2 drives provide high performance, high capacity data storage for a variety of systems with a Serial Attached SCSI (SAS) interface. The Serial Attached SCSI interface is designed to meet next-generation computing demands for performance, scalability, flexibility and high-density storage requirements.

Pulsar.2 drives are random access storage devices designed to support the Serial Attached SCSI Protocol as described in the ANSI specifications, this document, and the SAS Interface Manual (part number 100293071) which describes the general interface characteristics of this drive. Pulsar.2 drives are classified as intelligent peripherals and provide level 2 conformance (highest level) with the ANSI SCSI-1 standard. The SAS connectors, cables and electrical interface are compatible with Serial ATA (SATA), giving future users the choice of populating their systems with either SAS or SATA drives. This allows users to continue to leverage existing investment in SCSI while gaining a 6Gb/s serial data transfer rate.

The Self-Encrypting Drive models indicated on the cover of this product manual have provisions for “Security of Data at Rest” based on the standards defined by the Trusted Computing Group (see www.trustedcomputinggroup.org).

Note. Never disassemble and do not attempt to service items in the enclosure. The drive does not contain user-replaceable parts. Opening for any reason voids the drive warranty.

3.1STANDARD FEATURES

Pulsar.2 SAS drives have the following standard features:

•1.5 / 3.0 / 6.0 Gb Serial Attached SCSI (SAS) interface

•Integrated dual port SAS controller supporting the SCSI protocol

•Support for SAS expanders and fanout adapters

•Firmware downloadable using the SAS interface

•128 - deep task set (queue)

•Supports up to 32 initiators

•Jumperless configuration

•User-selectable logical block size (512, 520, 524, 528, 4096, 4160, 4192, or 4224 bytes per logical block)

•Industry standard SFF 2.5-inch dimensions

•ECC maximum burst correction length of 96 bits

•No preventive maintenance or adjustments required

•Self diagnostics performed when power is applied to the drive

•Vertical, horizontal, or top down mounting

•Drive Self Test (DST)

•Background Media Scan (BMS)

•Parallel flash access channels

•Power loss data protection

•Thin Provisioning with Block Unmap Support

•Silent operation

•Lifetime Endurance Management (available on certain models)

Pulsar.2 SAS Self-Encrypting Drive models have the following additional features:

•Automatic data encryption/decryption

•Controlled access

•Random number generator

•Drive locking

•16 independent data bands

•Cryptographic erase of user data for a drive that will be repurposed or scrapped

•Authenticated firmware download

PULSAR.2 SAS PRODUCT MANUAL, REV. C

6

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Pulsar.2 SAS Document Revision History Revision Date Description of changesContents PHYSICAL/ELECTRICAL Specifications Defect and Error ManagementInstallation About Fips About SELF-ENCRYPTING DrivesInterface Requirements Figures Seagate Technology Support Services Scope Standard models Standard SED models Fips 140-2 LevelApplicable Standards and Reference Documentation Electromagnetic compatibilityElectromagnetic susceptibility Electromagnetic compliance Electromagnetic compliance for the European UnionAustralian C-Tick Korean KCCChina Restriction of Hazardous Substances RoHS Directive General Description 800GB 400GB 200GB 100GB 512520 524Thin Provisioning Product Configuration Logical Block ProvisioningThin Provisioning capabilities Format Unit command PI and SED Drive ConfigurationUnmap Protection Information PI and Security SEDPerformance Characteristics Format Mode Dcrt Bit IP Bit 800GB 400GB 200GB 100GBAccess time Typical Access Time μsecPerformance Managed Life Warranty Performance Usage Based WarrantyST800FM00 ST400FM00 ST200FM00 ST100FM00 PerformanceCaching write data Reliability Specifications Unrecoverable ErrorsInterface errors SSD Percentage Used Endurance Indicator Wear LevelingGarbage Collection Write AmplificationPreventive maintenance Hot plugging the drive4 S.M.A.R.T Controlling S.M.A.R.TPerformance impact Reporting controlDetermining rate Predictive failuresTemperature Log Page 0Dh Parameter Code Description 800/400/200/100GBProduct warranty Managed Life WarrantyUsage Based Warranty Extended test Function Code 010bPHYSICAL/ELECTRICAL Specifications Power consumptionStartup power Peak operating mode800GB standard model DC power requirements 800GB 6.0GB400GB standard model DC power requirements 400GB 6.0GB200GB standard model DC power requirements 200GB 6.0GB100GB standard model DC power requirements General DC power requirement notesPower sequencing Conducted noise immunityCurrent profiles Current profiles for 400GB models Current profiles for 100GB models 800GB models in 6Gb operation 400GB models in 6Gb operation200GB models in 6Gb operation 100GB models in 6Gb operation Environmental LimitsTemperature a. Operating Relative humidityEffective altitude sea level a. Operating Shock and vibration ShockAir cleanliness VibrationCorrosive environment Weight Pounds 160 grams Weight Pounds 100 grams Purpose Validation ProgramSeagate Enterprise SED Security LevelAdmin SP Default passwordAbout SELF-ENCRYPTING Drives Locking SPData Bands Defect and Error Management SSD Physical format address descriptorDrive Error Recovery Procedures Setting and determining the current Type Level Levels of PIIdentifying a Protection Information drive Installation Physical interfaceX = F 15lb = 67N Interface Requirements Task management functionsSAS task management functions supported Task management responsesSupported commands Format UnitPersistent Reserve Reassign Blocks Write and Verify Inquiry data Pulsar.2 Inquiry dataMode Sense data Mode Pages Mode Sense data for 800GB drivesMode Sense data for 400GB drives Mode Sense data for 200GB drives Mode Sense values for 100GB drives Miscellaneous features Miscellaneous statusSAS physical interface Datum B Section C C Section a a Physical characteristics Connector requirementsElectrical description Pin descriptionsPower LED drive signalSAS transmitters and receivers Ready LED OutDifferential signals General interface characteristics5G B/ S 0G B/ S Index Index SAS See also cooling Seagate Technology LLC Americas

ST800FM0002, ST100FM0002, ST200FM0002, ST400FM0012, ST800FM0032 specifications

The Seagate ST100FM0012, ST800FM0012, ST400FM0042, ST400FM0002, and ST100FM0052 are high-performance hard drives designed for enterprise applications, offering advanced features and reliability for demanding workloads.

The ST100FM0012 is a 10TB hard drive that strikes a balance between capacity and performance. It utilizes a 7200 RPM spindle speed and features a 256MB cache, enabling efficient data access and enhanced read/write performance. With Seagate’s AgileArray technology, the ST100FM0012 is optimized for NAS environments, providing multi-drive reliability and error recovery.

The ST800FM0012 is an 8TB variant that shares many features with its 10TB counterpart but is tailored for organizations needing robust storage without reaching the highest tier of capacity. Its dual-plane rotational vibration technology minimizes vibration in multi-drive systems, ensuring sustained performance over prolonged use. This makes it an excellent choice for virtualization and data-intensive applications.

The ST400FM0042 offers a 4TB capacity suited for smaller enterprise needs or as a backup solution. With an impressive performance profile, including a 7200 RPM speed and 128MB cache, it accommodates both sequential and random workloads with ease. This drive stands out with its PowerChoice technology, allowing users to manage power consumption and reduce operational costs.

Another 4TB option, the ST400FM0002, is particularly designed for hybrid configurations, pairing the fast access of the hard drive with the speed of SSDs. It features Seagate's advanced thermal management technologies, ensuring optimal operating temperatures and performance stability during intensive workloads.

The ST100FM0052 rounds out the lineup with a 10TB capacity but is specifically aimed at surveillance applications. It supports a workload rate of 180TB per year, making it ideal for always-on recording scenarios. The drive is built with optimized firmware, which ensures enhanced performance in write-intensive environments, essential for video recording and security systems.

All these drives are equipped with Seagate’s proprietary technologies, including data recovery services and built-in data protection features, ensuring data integrity and security. The drives are built for durability, reliability, and high performance in mission-critical environments, making them indispensable components of modern enterprise data storage solutions. With capacities ranging from 4TB to 10TB, they cater to varying storage needs across different sectors.
Top Page Image Contents