Seagate ST100FM0052, ST100FM0012, ST100FM0002 Vibration, Air cleanliness, Corrosive environment

Page 37

6.5.4.2Vibration

a. Operating—normal

The drive as installed for normal operation, shall comply with the complete specified performance while subjected to vibration: Vibration may be applied in the X, Y, or Z axis.

Operating normal translational random shaped profile

20 - 2000 Hz

11.08 GRMS

Note. This specification does not cover connection issues that may result from testing at this level.

b.Operating—abnormal

Equipment as installed for normal operation shall not incur physical damage while subjected to periodic vibration:

Vibration occurring at these levels may degrade operational performance during the abnormal vibration period. Specified operational performance will continue when normal operating vibration levels are resumed. This assumes system recovery routines are available.

Operating abnormal translational random shaped profile

 

20 - 2000 Hz

11.08 GRMS

Note. This specification does not cover connection issues that may result from testing at this level.

c.Non-operating

The limits of non-operating vibration shall apply to all conditions of handling and transportation. This includes both isolated drives and integrated drives.

The drive shall not incur physical damage or degraded performance as a result of vibration.

Vibration may be applied in the X, Y, or Z axis.

 

Non-operating translational random shaped profile

 

20 - 2000 Hz

11.08 GRMS

6.5.5Air cleanliness

The drive is designed to operate in a typical office environment with minimal environmental control.

6.5.6Corrosive environment

Seagate electronic drive components pass accelerated corrosion testing equivalent to 10 years exposure to light industrial environments containing sulfurous gases, chlorine and nitric oxide, classes G and H per ASTM B845. However, this accelerated testing cannot duplicate every potential application environment.

Users should use caution exposing any electronic components to uncontrolled chemical pollutants and corrosive chemicals as electronic drive component reliability can be affected by the installation environment. The silver, copper, nickel and gold films used in Seagate products are especially sensitive to the presence of sulfide, chloride, and nitrate contaminants. Sulfur is found to be the most damaging. In addition, electronic components should never be exposed to condensing water on the surface of the printed circuit board assembly (PCBA) or exposed to an ambient relative humidity greater than 95%. Materials used in cabinet fabrication, such as vulcanized rubber, that can outgas corrosive compounds should be minimized or eliminated. The useful life of any electronic equipment may be extended by replacing materials near circuitry with sulfide-free alternatives.

6.5.7Electromagnetic susceptibility

See Section 2.1.1.1.

PULSAR.2 SAS PRODUCT MANUAL, REV. C

31

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Pulsar.2 SAS Revision Date Description of changes Document Revision HistoryContents Defect and Error Management PHYSICAL/ELECTRICAL SpecificationsInstallation About Fips About SELF-ENCRYPTING DrivesInterface Requirements Figures Seagate Technology Support Services Standard models Standard SED models Fips 140-2 Level ScopeElectromagnetic compatibility Applicable Standards and Reference DocumentationElectromagnetic susceptibility Electromagnetic compliance for the European Union Electromagnetic complianceAustralian C-Tick Korean KCCChina Restriction of Hazardous Substances RoHS Directive General Description 512 800GB 400GB 200GB 100GB520 524Logical Block Provisioning Thin Provisioning Product ConfigurationThin Provisioning capabilities PI and SED Drive Configuration Format Unit commandUnmap Protection Information PI and Security SEDFormat Mode Dcrt Bit IP Bit 800GB 400GB 200GB 100GB Performance CharacteristicsAccess time Typical Access Time μsecPerformance Usage Based Warranty Performance Managed Life WarrantyST800FM00 ST400FM00 ST200FM00 ST100FM00 PerformanceCaching write data Unrecoverable Errors Reliability SpecificationsInterface errors Wear Leveling SSD Percentage Used Endurance IndicatorGarbage Collection Write AmplificationHot plugging the drive Preventive maintenance4 S.M.A.R.T Controlling S.M.A.R.TReporting control Performance impactDetermining rate Predictive failuresParameter Code Description 800/400/200/100GB Temperature Log Page 0DhManaged Life Warranty Product warrantyUsage Based Warranty Extended test Function Code 010bPower consumption PHYSICAL/ELECTRICAL SpecificationsStartup power Peak operating mode800GB 6.0GB 800GB standard model DC power requirements400GB 6.0GB 400GB standard model DC power requirements200GB 6.0GB 200GB standard model DC power requirementsGeneral DC power requirement notes 100GB standard model DC power requirementsConducted noise immunity Power sequencingCurrent profiles Current profiles for 400GB models Current profiles for 100GB models 400GB models in 6Gb operation 800GB models in 6Gb operation200GB models in 6Gb operation Environmental Limits 100GB models in 6Gb operationRelative humidity Temperature a. OperatingEffective altitude sea level a. Operating Shock Shock and vibrationVibration Air cleanlinessCorrosive environment Weight Pounds 160 grams Weight Pounds 100 grams Validation Program PurposeSeagate Enterprise SED Security LevelDefault password Admin SPAbout SELF-ENCRYPTING Drives Locking SPData Bands SSD Physical format address descriptor Defect and Error ManagementDrive Error Recovery Procedures Levels of PI Setting and determining the current Type LevelIdentifying a Protection Information drive Physical interface InstallationX = F 15lb = 67N Task management functions Interface RequirementsSAS task management functions supported Task management responsesFormat Unit Supported commandsPersistent Reserve Reassign Blocks Write and Verify Pulsar.2 Inquiry data Inquiry dataMode Sense data Mode Sense data for 800GB drives Mode PagesMode Sense data for 400GB drives Mode Sense data for 200GB drives Mode Sense values for 100GB drives Miscellaneous status Miscellaneous featuresSAS physical interface Datum B Section C C Section a a Connector requirements Physical characteristicsElectrical description Pin descriptionsLED drive signal PowerSAS transmitters and receivers Ready LED OutGeneral interface characteristics Differential signals5G B/ S 0G B/ S Index Index SAS See also cooling Americas Seagate Technology LLC

ST800FM0002, ST100FM0002, ST200FM0002, ST400FM0012, ST800FM0032 specifications

The Seagate ST100FM0012, ST800FM0012, ST400FM0042, ST400FM0002, and ST100FM0052 are high-performance hard drives designed for enterprise applications, offering advanced features and reliability for demanding workloads.

The ST100FM0012 is a 10TB hard drive that strikes a balance between capacity and performance. It utilizes a 7200 RPM spindle speed and features a 256MB cache, enabling efficient data access and enhanced read/write performance. With Seagate’s AgileArray technology, the ST100FM0012 is optimized for NAS environments, providing multi-drive reliability and error recovery.

The ST800FM0012 is an 8TB variant that shares many features with its 10TB counterpart but is tailored for organizations needing robust storage without reaching the highest tier of capacity. Its dual-plane rotational vibration technology minimizes vibration in multi-drive systems, ensuring sustained performance over prolonged use. This makes it an excellent choice for virtualization and data-intensive applications.

The ST400FM0042 offers a 4TB capacity suited for smaller enterprise needs or as a backup solution. With an impressive performance profile, including a 7200 RPM speed and 128MB cache, it accommodates both sequential and random workloads with ease. This drive stands out with its PowerChoice technology, allowing users to manage power consumption and reduce operational costs.

Another 4TB option, the ST400FM0002, is particularly designed for hybrid configurations, pairing the fast access of the hard drive with the speed of SSDs. It features Seagate's advanced thermal management technologies, ensuring optimal operating temperatures and performance stability during intensive workloads.

The ST100FM0052 rounds out the lineup with a 10TB capacity but is specifically aimed at surveillance applications. It supports a workload rate of 180TB per year, making it ideal for always-on recording scenarios. The drive is built with optimized firmware, which ensures enhanced performance in write-intensive environments, essential for video recording and security systems.

All these drives are equipped with Seagate’s proprietary technologies, including data recovery services and built-in data protection features, ensuring data integrity and security. The drives are built for durability, reliability, and high performance in mission-critical environments, making them indispensable components of modern enterprise data storage solutions. With capacities ranging from 4TB to 10TB, they cater to varying storage needs across different sectors.
Top Page Image Contents