Seagate ST100FM0012, ST100FM0052, ST100FM0002, ST200FM0012, ST200FM0002 manual Shock and vibration

Page 36

6.5.4Shock and vibration

Shock and vibration limits specified in this document are measured directly on the drive chassis. If the drive is installed in an enclosure to which the stated shock and/or vibration criteria is applied, resonances may occur internally to the enclosure resulting in drive movement in excess of the stated limits. If this situation is apparent, it may be necessary to modify the enclosure to minimize drive movement.

The limits of shock and vibration defined within this document are specified with the drive mounted by any of the four methods shown in Figure 11, and in accordance with the restrictions of Section 10.3.

6.5.4.1Shock

a.Operating—normal

The drive, as installed for normal operation, shall operate error free while subjected to intermittent shock not exceeding:

•1000 Gs at a maximum duration of 0.5ms (half sinewave)

Shock may be applied in the X, Y, or Z axis. Shock is not to be repeated more than once every 2 seconds.

Note. This specification does not cover connection issues that may result from testing at this level.

b.Non-operating

The limits of non-operating shock shall apply to all conditions of handling and transportation. This includes both isolated drives and integrated drives.

The drive subjected to nonrepetitive shock not exceeding the three values below, shall not exhibit device damage or performance degradation.

•1000 Gs at a maximum duration of 0.5ms (half sinewave) Shock may be applied in the X, Y, or Z axis.

c.Packaged

Seagate finished drive bulk packs are designed and tested to meet or exceed applicable ISTA and ASTM standards. Volume finished drives will be shipped from Seagate factories on pallets to minimize freight costs and ease material handling. Seagate finished drive bulk packs may be shipped individually. For less than full shipments, instructions are printed on the bulk pack carton for minimum drive quantities and proper drive placement.

Figure 11. Recommended mounting

Note. Image may not represent actual product, for reference only.

PULSAR.2 SAS PRODUCT MANUAL, REV. C

30

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Pulsar.2 SAS Document Revision History Revision Date Description of changesContents PHYSICAL/ELECTRICAL Specifications Defect and Error ManagementInstallation About Fips About SELF-ENCRYPTING DrivesInterface Requirements Figures Seagate Technology Support Services Scope Standard models Standard SED models Fips 140-2 LevelApplicable Standards and Reference Documentation Electromagnetic compatibilityElectromagnetic susceptibility Electromagnetic compliance Electromagnetic compliance for the European UnionAustralian C-Tick Korean KCCChina Restriction of Hazardous Substances RoHS Directive General Description 800GB 400GB 200GB 100GB 512520 524Thin Provisioning Product Configuration Logical Block ProvisioningThin Provisioning capabilities Format Unit command PI and SED Drive ConfigurationUnmap Protection Information PI and Security SEDPerformance Characteristics Format Mode Dcrt Bit IP Bit 800GB 400GB 200GB 100GBAccess time Typical Access Time μsecPerformance Managed Life Warranty Performance Usage Based WarrantyST800FM00 ST400FM00 ST200FM00 ST100FM00 PerformanceCaching write data Reliability Specifications Unrecoverable ErrorsInterface errors SSD Percentage Used Endurance Indicator Wear LevelingGarbage Collection Write AmplificationPreventive maintenance Hot plugging the drive4 S.M.A.R.T Controlling S.M.A.R.TPerformance impact Reporting controlDetermining rate Predictive failuresTemperature Log Page 0Dh Parameter Code Description 800/400/200/100GBProduct warranty Managed Life WarrantyUsage Based Warranty Extended test Function Code 010bPHYSICAL/ELECTRICAL Specifications Power consumptionStartup power Peak operating mode800GB standard model DC power requirements 800GB 6.0GB400GB standard model DC power requirements 400GB 6.0GB200GB standard model DC power requirements 200GB 6.0GB100GB standard model DC power requirements General DC power requirement notesPower sequencing Conducted noise immunityCurrent profiles Current profiles for 400GB models Current profiles for 100GB models 800GB models in 6Gb operation 400GB models in 6Gb operation200GB models in 6Gb operation 100GB models in 6Gb operation Environmental LimitsTemperature a. Operating Relative humidityEffective altitude sea level a. Operating Shock and vibration ShockAir cleanliness VibrationCorrosive environment Weight Pounds 160 grams Weight Pounds 100 grams Purpose Validation ProgramSeagate Enterprise SED Security LevelAdmin SP Default passwordAbout SELF-ENCRYPTING Drives Locking SPData Bands Defect and Error Management SSD Physical format address descriptorDrive Error Recovery Procedures Setting and determining the current Type Level Levels of PIIdentifying a Protection Information drive Installation Physical interfaceX = F 15lb = 67N Interface Requirements Task management functionsSAS task management functions supported Task management responsesSupported commands Format UnitPersistent Reserve Reassign Blocks Write and Verify Inquiry data Pulsar.2 Inquiry dataMode Sense data Mode Pages Mode Sense data for 800GB drivesMode Sense data for 400GB drives Mode Sense data for 200GB drives Mode Sense values for 100GB drives Miscellaneous features Miscellaneous statusSAS physical interface Datum B Section C C Section a a Physical characteristics Connector requirementsElectrical description Pin descriptionsPower LED drive signalSAS transmitters and receivers Ready LED OutDifferential signals General interface characteristics5G B/ S 0G B/ S Index Index SAS See also cooling Seagate Technology LLC Americas

ST800FM0002, ST100FM0002, ST200FM0002, ST400FM0012, ST800FM0032 specifications

The Seagate ST100FM0012, ST800FM0012, ST400FM0042, ST400FM0002, and ST100FM0052 are high-performance hard drives designed for enterprise applications, offering advanced features and reliability for demanding workloads.

The ST100FM0012 is a 10TB hard drive that strikes a balance between capacity and performance. It utilizes a 7200 RPM spindle speed and features a 256MB cache, enabling efficient data access and enhanced read/write performance. With Seagate’s AgileArray technology, the ST100FM0012 is optimized for NAS environments, providing multi-drive reliability and error recovery.

The ST800FM0012 is an 8TB variant that shares many features with its 10TB counterpart but is tailored for organizations needing robust storage without reaching the highest tier of capacity. Its dual-plane rotational vibration technology minimizes vibration in multi-drive systems, ensuring sustained performance over prolonged use. This makes it an excellent choice for virtualization and data-intensive applications.

The ST400FM0042 offers a 4TB capacity suited for smaller enterprise needs or as a backup solution. With an impressive performance profile, including a 7200 RPM speed and 128MB cache, it accommodates both sequential and random workloads with ease. This drive stands out with its PowerChoice technology, allowing users to manage power consumption and reduce operational costs.

Another 4TB option, the ST400FM0002, is particularly designed for hybrid configurations, pairing the fast access of the hard drive with the speed of SSDs. It features Seagate's advanced thermal management technologies, ensuring optimal operating temperatures and performance stability during intensive workloads.

The ST100FM0052 rounds out the lineup with a 10TB capacity but is specifically aimed at surveillance applications. It supports a workload rate of 180TB per year, making it ideal for always-on recording scenarios. The drive is built with optimized firmware, which ensures enhanced performance in write-intensive environments, essential for video recording and security systems.

All these drives are equipped with Seagate’s proprietary technologies, including data recovery services and built-in data protection features, ensuring data integrity and security. The drives are built for durability, reliability, and high performance in mission-critical environments, making them indispensable components of modern enterprise data storage solutions. With capacities ranging from 4TB to 10TB, they cater to varying storage needs across different sectors.
Top Page Image Contents