Seagate ST800FM0002, ST100FM0012 manual Scope, Standard models Standard SED models Fips 140-2 Level

Page 8

1.0SCOPE

This manual describes Seagate Technology® LLC, Pulsar®.2 SAS (Serial Attached SCSI) drives.

Pulsar.2 drives support the SAS Protocol specifications to the extent described in this manual. The SAS Interface Manual (part number 100293071) describes the general SAS characteristics of this and other Seagate SAS drives. The Self-Encrypting Drive Reference Manual, part number 100515636, describes the interface, general operation, and security features available on Self-Encrypting Drive models.

Product data communicated in this manual is specific only to the model numbers listed in this manual. The data listed in this manual may not be predictive of future generation specifications or requirements. If you are designing a system which will use one of the models listed or future generation products and need further assistance, please contact your Field Applications Engineer (FAE) or our global support services group as shown in See “Seagate Technology Support Services” on page 1.

Unless otherwise stated, the information in this manual applies to standard and Self-Encrypting Drive models.

Standard models

Standard SED models

FIPS 140-2 LEVEL 2

 

 

 

ST800FM0002

ST800FM0012

ST800FM0022

 

 

 

ST800FM0032

ST800FM0042

 

 

 

 

ST400FM0002

 

 

 

 

 

ST400FM0042

 

 

 

 

 

ST200FM0002

 

 

 

 

 

ST200FM0042

 

 

 

 

 

ST100FM0002

 

 

 

 

 

ST100FM0052

 

 

 

 

 

Note. Previous generations of Seagate Self-Encrypting Drive models were called Full Disk Encryption (FDE) models before a differ- entiation between drive-based encryption and other forms of encryption was necessary.

Note. The Self-Encrypting Drive models indicated on the cover of this product manual have provisions for “Security of Data at Rest” based on the standards defined by the Trusted Computing Group (see www.trustedcomputinggroup.org).

For more information on FIPS 140-2 Level 2 certification Section 7.0 on page 34.

For product certification status visit - http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/1401vend.htm.

PULSAR.2 SAS PRODUCT MANUAL, REV. C

2

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Pulsar.2 SAS Document Revision History Revision Date Description of changesContents PHYSICAL/ELECTRICAL Specifications Defect and Error ManagementInstallation About Fips About SELF-ENCRYPTING DrivesInterface Requirements Figures Seagate Technology Support Services Scope Standard models Standard SED models Fips 140-2 LevelElectromagnetic susceptibility Applicable Standards and Reference DocumentationElectromagnetic compatibility Electromagnetic compliance Electromagnetic compliance for the European UnionAustralian C-Tick Korean KCCChina Restriction of Hazardous Substances RoHS Directive General Description 800GB 400GB 200GB 100GB 512520 524Thin Provisioning capabilities Thin Provisioning Product ConfigurationLogical Block Provisioning Format Unit command PI and SED Drive ConfigurationUnmap Protection Information PI and Security SEDPerformance Characteristics Format Mode Dcrt Bit IP Bit 800GB 400GB 200GB 100GBAccess time Typical Access Time μsecPerformance Managed Life Warranty Performance Usage Based WarrantyST800FM00 ST400FM00 ST200FM00 ST100FM00 PerformanceCaching write data Interface errors Reliability SpecificationsUnrecoverable Errors SSD Percentage Used Endurance Indicator Wear LevelingGarbage Collection Write AmplificationPreventive maintenance Hot plugging the drive4 S.M.A.R.T Controlling S.M.A.R.TPerformance impact Reporting controlDetermining rate Predictive failuresTemperature Log Page 0Dh Parameter Code Description 800/400/200/100GBProduct warranty Managed Life WarrantyUsage Based Warranty Extended test Function Code 010bPHYSICAL/ELECTRICAL Specifications Power consumptionStartup power Peak operating mode800GB standard model DC power requirements 800GB 6.0GB400GB standard model DC power requirements 400GB 6.0GB200GB standard model DC power requirements 200GB 6.0GB100GB standard model DC power requirements General DC power requirement notesCurrent profiles Power sequencingConducted noise immunity Current profiles for 400GB models Current profiles for 100GB models 200GB models in 6Gb operation 800GB models in 6Gb operation400GB models in 6Gb operation 100GB models in 6Gb operation Environmental LimitsEffective altitude sea level a. Operating Temperature a. OperatingRelative humidity Shock and vibration ShockCorrosive environment Air cleanlinessVibration Weight Pounds 160 grams Weight Pounds 100 grams Purpose Validation ProgramSeagate Enterprise SED Security LevelAdmin SP Default passwordAbout SELF-ENCRYPTING Drives Locking SPData Bands Defect and Error Management SSD Physical format address descriptorDrive Error Recovery Procedures Identifying a Protection Information drive Setting and determining the current Type LevelLevels of PI Installation Physical interfaceX = F 15lb = 67N Interface Requirements Task management functionsSAS task management functions supported Task management responsesSupported commands Format UnitPersistent Reserve Reassign Blocks Write and Verify Inquiry data Pulsar.2 Inquiry dataMode Sense data Mode Pages Mode Sense data for 800GB drivesMode Sense data for 400GB drives Mode Sense data for 200GB drives Mode Sense values for 100GB drives SAS physical interface Miscellaneous featuresMiscellaneous status Datum B Section C C Section a a Physical characteristics Connector requirementsElectrical description Pin descriptionsPower LED drive signalSAS transmitters and receivers Ready LED Out5G B/ S 0G B/ S Differential signalsGeneral interface characteristics Index Index SAS See also cooling Seagate Technology LLC Americas

ST800FM0002, ST100FM0002, ST200FM0002, ST400FM0012, ST800FM0032 specifications

The Seagate ST100FM0012, ST800FM0012, ST400FM0042, ST400FM0002, and ST100FM0052 are high-performance hard drives designed for enterprise applications, offering advanced features and reliability for demanding workloads.

The ST100FM0012 is a 10TB hard drive that strikes a balance between capacity and performance. It utilizes a 7200 RPM spindle speed and features a 256MB cache, enabling efficient data access and enhanced read/write performance. With Seagate’s AgileArray technology, the ST100FM0012 is optimized for NAS environments, providing multi-drive reliability and error recovery.

The ST800FM0012 is an 8TB variant that shares many features with its 10TB counterpart but is tailored for organizations needing robust storage without reaching the highest tier of capacity. Its dual-plane rotational vibration technology minimizes vibration in multi-drive systems, ensuring sustained performance over prolonged use. This makes it an excellent choice for virtualization and data-intensive applications.

The ST400FM0042 offers a 4TB capacity suited for smaller enterprise needs or as a backup solution. With an impressive performance profile, including a 7200 RPM speed and 128MB cache, it accommodates both sequential and random workloads with ease. This drive stands out with its PowerChoice technology, allowing users to manage power consumption and reduce operational costs.

Another 4TB option, the ST400FM0002, is particularly designed for hybrid configurations, pairing the fast access of the hard drive with the speed of SSDs. It features Seagate's advanced thermal management technologies, ensuring optimal operating temperatures and performance stability during intensive workloads.

The ST100FM0052 rounds out the lineup with a 10TB capacity but is specifically aimed at surveillance applications. It supports a workload rate of 180TB per year, making it ideal for always-on recording scenarios. The drive is built with optimized firmware, which ensures enhanced performance in write-intensive environments, essential for video recording and security systems.

All these drives are equipped with Seagate’s proprietary technologies, including data recovery services and built-in data protection features, ensuring data integrity and security. The drives are built for durability, reliability, and high performance in mission-critical environments, making them indispensable components of modern enterprise data storage solutions. With capacities ranging from 4TB to 10TB, they cater to varying storage needs across different sectors.
Top Page Image Contents