Seagate ST800FM0032 manual Reliability Specifications, Unrecoverable Errors, Interface errors

Page 19

5.0RELIABILITY SPECIFICATIONS

The following reliability specifications assume correct host and drive operational interface, including all interface timings, power supply voltages, environmental requirements and drive mounting constraints.

Read Error Rates 1

 

 

Unrecovered Data

Less than 1 LBA in 1016 bits transferred

 

Miscorrected Data

Less than 1 LBA in 1021 bits transferred

 

Interface error rate:

Less than 1 error in 1012 bits transferred

 

Mean Time Between Failure (MTBF):

2,000,000 hours

 

Annualized Failure Rate (AFR):

0.44%

 

Preventive maintenance:

None required

 

Typical Data Retention with

3 months

 

Power removed (at 40C) 2

 

 

Endurance Rating: 3

Method 1: Full drive writes per day 10

 

 

Method 2: TBW (per JEDEC JESD218 800GB = 17,800 TB

 

400GB =

8800 TB

 

200GB =

4400 TB

 

100GB =

2200 TB

1.Error rate specified with automatic retries and data correction with ECC enabled and all flaws reallocated.

2.As NAND Flash devices age with use, the capability of the media to retain a programmed value begins to deteriorate. This deterioration is affected by the number of times a particular memory cell is programmed and subsequently erased. When a device is new, it has a powered off data retention capability of up to several years. With use the retention ca- pability of the device is reduced. Temperature also has an effect on how long a Flash component can retain its pro- grammed value with power removed. At high temperature the retention capabilities of the device are reduced. Data retention is not an issue with power applied to the SSD. The SSD drive contains firmware and hardware features that can monitor and refresh memory cells when power is applied.

3.Endurance rating is the expected amount of host data that can be written by product when subjected to a specified work- load at a specified operating and storage temperature. For the specific workload to achieve this level of endurance, please reference JEDEC Specification JESD218. TBW is defined as 1x10^12 Bytes.

5.1ERROR RATES

The error rates stated in this manual assume the following:

•The drive is operated in accordance with this manual using DC power as defined in paragraph 6.3, "DC power requirements."

•Errors caused by host system failures are excluded from error rate computations.

•Assume random data.

•Default OEM error recovery settings are applied. This includes AWRE, ARRE, full read retries, full write retries and full retry time.

5.1.1Unrecoverable Errors

An unrecoverable data error is defined as a failure of the drive to recover data from the media. These errors occur due to read or write problems. Unrecoverable data errors are only detected during read operations, but not caused by the read. If an unrecoverable data error is detected, a MEDIUM ERROR (03h) in the Sense Key will be reported. Multiple unrecoverable data errors resulting from the same cause are treated as 1 error.

5.1.2Interface errors

An interface error is defined as a failure of the receiver on a port to recover the data as transmitted by the device port connected to the receiver. The error may be detected as a running disparity error, illegal code, loss of word sync, or CRC error.

PULSAR.2 SAS PRODUCT MANUAL, REV. C

13

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Pulsar.2 SAS Revision Date Description of changes Document Revision HistoryContents About Fips About SELF-ENCRYPTING Drives PHYSICAL/ELECTRICAL SpecificationsDefect and Error Management InstallationInterface Requirements Figures Seagate Technology Support Services Standard models Standard SED models Fips 140-2 Level ScopeElectromagnetic compatibility Applicable Standards and Reference DocumentationElectromagnetic susceptibility Korean KCC Electromagnetic complianceElectromagnetic compliance for the European Union Australian C-TickChina Restriction of Hazardous Substances RoHS Directive General Description 524 800GB 400GB 200GB 100GB512 520Logical Block Provisioning Thin Provisioning Product ConfigurationThin Provisioning capabilities Protection Information PI and Security SED Format Unit commandPI and SED Drive Configuration UnmapTypical Access Time μsec Performance CharacteristicsFormat Mode Dcrt Bit IP Bit 800GB 400GB 200GB 100GB Access timePerformance Performance Managed Life WarrantyPerformance Usage Based Warranty ST800FM00 ST400FM00 ST200FM00 ST100FM00Caching write data Unrecoverable Errors Reliability SpecificationsInterface errors Write Amplification SSD Percentage Used Endurance IndicatorWear Leveling Garbage CollectionControlling S.M.A.R.T Preventive maintenanceHot plugging the drive 4 S.M.A.R.TPredictive failures Performance impactReporting control Determining rateParameter Code Description 800/400/200/100GB Temperature Log Page 0DhExtended test Function Code 010b Product warrantyManaged Life Warranty Usage Based WarrantyPeak operating mode PHYSICAL/ELECTRICAL SpecificationsPower consumption Startup power800GB 6.0GB 800GB standard model DC power requirements400GB 6.0GB 400GB standard model DC power requirements200GB 6.0GB 200GB standard model DC power requirementsGeneral DC power requirement notes 100GB standard model DC power requirementsConducted noise immunity Power sequencingCurrent profiles Current profiles for 400GB models Current profiles for 100GB models 400GB models in 6Gb operation 800GB models in 6Gb operation200GB models in 6Gb operation Environmental Limits 100GB models in 6Gb operationRelative humidity Temperature a. OperatingEffective altitude sea level a. Operating Shock Shock and vibrationVibration Air cleanlinessCorrosive environment Weight Pounds 160 grams Weight Pounds 100 grams Security Level PurposeValidation Program Seagate Enterprise SEDLocking SP Admin SPDefault password About SELF-ENCRYPTING DrivesData Bands SSD Physical format address descriptor Defect and Error ManagementDrive Error Recovery Procedures Levels of PI Setting and determining the current Type LevelIdentifying a Protection Information drive Physical interface InstallationX = F 15lb = 67N Task management responses Interface RequirementsTask management functions SAS task management functions supportedFormat Unit Supported commandsPersistent Reserve Reassign Blocks Write and Verify Pulsar.2 Inquiry data Inquiry dataMode Sense data Mode Sense data for 800GB drives Mode PagesMode Sense data for 400GB drives Mode Sense data for 200GB drives Mode Sense values for 100GB drives Miscellaneous status Miscellaneous featuresSAS physical interface Datum B Section C C Section a a Pin descriptions Physical characteristicsConnector requirements Electrical descriptionReady LED Out PowerLED drive signal SAS transmitters and receiversGeneral interface characteristics Differential signals5G B/ S 0G B/ S Index Index SAS See also cooling Americas Seagate Technology LLC

ST800FM0002, ST100FM0002, ST200FM0002, ST400FM0012, ST800FM0032 specifications

The Seagate ST100FM0012, ST800FM0012, ST400FM0042, ST400FM0002, and ST100FM0052 are high-performance hard drives designed for enterprise applications, offering advanced features and reliability for demanding workloads.

The ST100FM0012 is a 10TB hard drive that strikes a balance between capacity and performance. It utilizes a 7200 RPM spindle speed and features a 256MB cache, enabling efficient data access and enhanced read/write performance. With Seagate’s AgileArray technology, the ST100FM0012 is optimized for NAS environments, providing multi-drive reliability and error recovery.

The ST800FM0012 is an 8TB variant that shares many features with its 10TB counterpart but is tailored for organizations needing robust storage without reaching the highest tier of capacity. Its dual-plane rotational vibration technology minimizes vibration in multi-drive systems, ensuring sustained performance over prolonged use. This makes it an excellent choice for virtualization and data-intensive applications.

The ST400FM0042 offers a 4TB capacity suited for smaller enterprise needs or as a backup solution. With an impressive performance profile, including a 7200 RPM speed and 128MB cache, it accommodates both sequential and random workloads with ease. This drive stands out with its PowerChoice technology, allowing users to manage power consumption and reduce operational costs.

Another 4TB option, the ST400FM0002, is particularly designed for hybrid configurations, pairing the fast access of the hard drive with the speed of SSDs. It features Seagate's advanced thermal management technologies, ensuring optimal operating temperatures and performance stability during intensive workloads.

The ST100FM0052 rounds out the lineup with a 10TB capacity but is specifically aimed at surveillance applications. It supports a workload rate of 180TB per year, making it ideal for always-on recording scenarios. The drive is built with optimized firmware, which ensures enhanced performance in write-intensive environments, essential for video recording and security systems.

All these drives are equipped with Seagate’s proprietary technologies, including data recovery services and built-in data protection features, ensuring data integrity and security. The drives are built for durability, reliability, and high performance in mission-critical environments, making them indispensable components of modern enterprise data storage solutions. With capacities ranging from 4TB to 10TB, they cater to varying storage needs across different sectors.
Top Page Image Contents