Seagate DB35.4 manual 3 S.M.A.R.T. commands, Code in features register A.R.T. command

Page 36

4.3.3S.M.A.R.T. commands

S.M.A.R.T. provides near-term failure prediction for disc drives. When S.M.A.R.T. is enabled, the drive moni- tors predetermined drive attributes that are susceptible to degradation over time. If self-monitoring determines that a failure is likely, S.M.A.R.T. makes a status report available to the host. Not all failures are predictable. S.M.A.R.T. predictability is limited to the attributes the drive can monitor. For more information on S.M.A.R.T. commands and implementation, see the Draft ATA-5 Standard.

SeaTools diagnostic software activates a built-in drive self-test (DST S.M.A.R.T. command for D4H) that elimi- nates unnecessary drive returns. The diagnostic software ships with all new drives and is also available at: http://seatools.seagate.com.

This drive is shipped with S.M.A.R.T. features disabled. You must have a recent BIOS or software package that supports S.M.A.R.T. to enable this feature. The table below shows the S.M.A.R.T. command codes that the drive uses.

Table 8:

S.M.A.R.T. commands

 

 

Code in features register

S.M.A.R.T. command

 

 

 

D0H

 

S.M.A.R.T. Read Data

D2H

 

S.M.A.R.T. Enable/Disable Attribute Autosave

D3H

 

S.M.A.R.T. Save Attribute Values

D4H

 

S.M.A.R.T. Execute Off-line Immediate (runs DST)

D5H

 

S.M.A.R.T. Read Log Sector

D6H

 

S.M.A.R.T. Write Log Sector

D8H

 

S.M.A.R.T. Enable Operations

D9H

 

S.M.A.R.T. Disable Operations

DAH

 

S.M.A.R.T. Return Status

Note. If an appropriate code is not written to the Features Register, the command is aborted and 0x04 (abort) is written to the Error register.

30

DB35.4 Series SATA Product Manual, Rev. C

Page 35 Page 37
Image 36
Page 35 Page 37
Contents DB35.4 Series Sata ST3250310CSRevision history Revision DateContents DB35.4 Series Sata Product Manual, Rev. C List of Figures Page Introduction About the Serial ATA interface Drive specifications Specification summary tablesDrive specifications summary for 250 Gbyte model Drive specification ST3250310CSDB35.4 Series Sata Product Manual, Rev. C Default logical geometry LBA modeFormatted capacity Recording and interface technologyPhysical characteristics Seek timeStart/stop times Typical seek times msec Read WritePower specifications Typical current profiles Conducted noiseVoltage tolerance Power-management modes Active modeIdle mode Sleep modeEnvironmental specifications Vibration Operating vibrationNonoperating vibration Drive A-weighted Sound Power Levels SWL, BA Acoustics emissionsElectromagnetic immunity Test for Prominent Discrete Tones PDTsSafety certification ReliabilityAgency certification Annualized Failure Rate AFRKorean RRL Australian C-Tick N176FCC verification Environmental protection Corrosive environmentChina Restriction of Hazardous Substances RoHS Directive Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions Drive mountingDB35.4 Series Sata Product Manual, Rev. C Serial ATA Sata interface Hot-Plug compatibilitySerial ATA device plug connector pin definitions Serial ATA connector pin definitionsSignal Pin Function DefinitionSupported ATA commands Supported ATA commandsCommand name Command code in hex F4H Identify Device command Word Description ValueXx07H 129 Seagate-reserved Description if bit is set to Bit Word Bit WordSet Features command Set Features command values3 S.M.A.R.T. commands A.R.T. commandsCode in features register A.R.T. command Seagate Technology support services InternetPresales Support Technical SupportWarranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Index ITE Page DB35.4 Series Sata Product Manual, Rev. C Page Seagate Technology LLC

DB35.4 specifications

The Seagate DB35.4 series of hard disk drives (HDDs) represents a significant advancement in data storage solutions for digital video recording and other demanding applications. Designed specifically for use in DVRs, NVRs, and related multimedia production environments, the DB35.4 drives are tailored to meet the rigorous requirements of streaming and recording high-definition video content.

One of the standout features of the DB35.4 series is its optimized design for continuous operation. These drives are built to handle workloads that involve constant read and write cycles, making them ideal for multi-channel recording setups. With a Mean Time Between Failures (MTBF) rating of 1.2 million hours, the drives ensure reliability and durability, essential for critical applications in broadcasting and surveillance.

The DB35.4 series supports advanced technologies, including native command queuing (NCQ), which enhances performance by allowing multiple read and write commands to be processed simultaneously. This results in improved data transfer rates and reduced latency, which are vital for applications requiring swift access to stored content. With capacities ranging from 250 GB to 2 TB, the drives provide ample space for storing extensive video libraries.

In terms of performance, the DB35.4 features a rotational speed of 7200 RPM, combined with a SATA interface that enables high-speed data transfers. The drives usually come equipped with 8 MB or higher cache memory, further boosting their efficiency during heavy data loads. This ensures that users experience smooth playback and recording, minimizing the risk of dropped frames or buffering.

Energy efficiency is another key characteristic of the Seagate DB35.4 series. Designed with power management in mind, these drives consume less energy during operation while still delivering optimal performance. This not only reduces operational costs but also contributes to a more environmentally friendly solution for users looking to maximize their storage capabilities without excessive power consumption.

In summary, the Seagate DB35.4 HDDs stand out for their reliability, performance, and efficiency. With their specialized design for multimedia applications, advanced technologies like NCQ, and a focus on energy savings, the DB35.4 series remains a preferred choice for businesses and individuals aiming to optimize their digital storage solutions in a demanding video-centric world.
Top Page Image Contents