Seagate DB35.4 manual Power-management modes, Active mode, Idle mode, Sleep mode

Page 16

2.8.4Power-management modes

The drive provides programmable power management to provide greater energy efficiency. In most systems, you can control power management through the system setup program. The drive features the following power-management modes:

Power modes

Heads

Spindle

Buffer

 

 

 

 

Active

Tracking

Rotating

Enabled

 

 

 

 

Idle

Tracking

Rotating

Enabled

 

 

 

 

Standby

Parked

Stopped

Enabled

 

 

 

 

Sleep

Parked

Stopped

Disabled

 

 

 

 

•Active mode

The drive is in Active mode during the read/write and seek operations.

• Idle mode

The buffer remains enabled, and the drive accepts all commands and returns to Active mode any time disc access is necessary.

•Standby mode

The drive enters Standby mode when the host sends a Standby Immediate command. If the host has set the standby timer, the drive can also enter Standby mode automatically after the drive has been inactive for a specifiable length of time. The standby timer delay is established using a Standby or Idle command. In Standby mode, the drive buffer is enabled, the heads are parked and the spindle is at rest. The drive accepts all commands and returns to Active mode any time disc access is necessary.

• Sleep mode

The drive enters Sleep mode after receiving a Sleep command from the host. In Sleep mode, the drive buffer is disabled, the heads are parked and the spindle is at rest. The drive leaves Sleep mode after it receives a Hard Reset or Soft Reset from the host. After receiving a reset, the drive exits Sleep mode and enters Standby mode with all current translation parameters intact.

• Idle and Standby timers

Each time the drive performs an Active function (read, write or seek), the standby timer is reinitialized and begins counting down from its specified delay times to zero. If the standby timer reaches zero before any drive activity is required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the drive accepts all commands and returns to Active mode when disc access is necessary.

10

DB35.4 Series SATA Product Manual, Rev. C

Page 15 Page 17
Image 16
Page 15 Page 17
Contents DB35.4 Series Sata ST3250310CSRevision history Revision DateContents DB35.4 Series Sata Product Manual, Rev. C List of Figures Page Introduction About the Serial ATA interface Drive specifications Specification summary tablesDrive specifications summary for 250 Gbyte model Drive specification ST3250310CSDB35.4 Series Sata Product Manual, Rev. C Default logical geometry LBA modeFormatted capacity Recording and interface technologyPhysical characteristics Seek timeStart/stop times Typical seek times msec Read WritePower specifications Conducted noise Typical current profilesVoltage tolerance Power-management modes Active modeIdle mode Sleep modeEnvironmental specifications Operating vibration VibrationNonoperating vibration Drive A-weighted Sound Power Levels SWL, BA Acoustics emissionsElectromagnetic immunity Test for Prominent Discrete Tones PDTsSafety certification ReliabilityAgency certification Annualized Failure Rate AFRAustralian C-Tick N176 Korean RRLFCC verification Corrosive environment Environmental protectionChina Restriction of Hazardous Substances RoHS Directive Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions Drive mountingDB35.4 Series Sata Product Manual, Rev. C Serial ATA Sata interface Hot-Plug compatibilitySerial ATA device plug connector pin definitions Serial ATA connector pin definitionsSignal Pin Function DefinitionSupported ATA commands Supported ATA commandsCommand name Command code in hex F4H Identify Device command Word Description ValueXx07H 129 Seagate-reserved Description if bit is set to Bit Word Bit WordSet Features command Set Features command valuesA.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Seagate Technology support services InternetPresales Support Technical SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index ITE Page DB35.4 Series Sata Product Manual, Rev. C Page Seagate Technology LLC

DB35.4 specifications

The Seagate DB35.4 series of hard disk drives (HDDs) represents a significant advancement in data storage solutions for digital video recording and other demanding applications. Designed specifically for use in DVRs, NVRs, and related multimedia production environments, the DB35.4 drives are tailored to meet the rigorous requirements of streaming and recording high-definition video content.

One of the standout features of the DB35.4 series is its optimized design for continuous operation. These drives are built to handle workloads that involve constant read and write cycles, making them ideal for multi-channel recording setups. With a Mean Time Between Failures (MTBF) rating of 1.2 million hours, the drives ensure reliability and durability, essential for critical applications in broadcasting and surveillance.

The DB35.4 series supports advanced technologies, including native command queuing (NCQ), which enhances performance by allowing multiple read and write commands to be processed simultaneously. This results in improved data transfer rates and reduced latency, which are vital for applications requiring swift access to stored content. With capacities ranging from 250 GB to 2 TB, the drives provide ample space for storing extensive video libraries.

In terms of performance, the DB35.4 features a rotational speed of 7200 RPM, combined with a SATA interface that enables high-speed data transfers. The drives usually come equipped with 8 MB or higher cache memory, further boosting their efficiency during heavy data loads. This ensures that users experience smooth playback and recording, minimizing the risk of dropped frames or buffering.

Energy efficiency is another key characteristic of the Seagate DB35.4 series. Designed with power management in mind, these drives consume less energy during operation while still delivering optimal performance. This not only reduces operational costs but also contributes to a more environmentally friendly solution for users looking to maximize their storage capabilities without excessive power consumption.

In summary, the Seagate DB35.4 HDDs stand out for their reliability, performance, and efficiency. With their specialized design for multimedia applications, advanced technologies like NCQ, and a focus on energy savings, the DB35.4 series remains a preferred choice for businesses and individuals aiming to optimize their digital storage solutions in a demanding video-centric world.
Top Page Image Contents