Seagate DB35.4 manual Introduction

Page 7

1.0Introduction

This manual describes the functional, mechanical and interface specifications for the following Seagate DB35.4® Series model drive:

ST3250310CS

These drives provide the following key features:

•Low profile deck design for improved air-flow and low-profile system design.

•High instantaneous (burst) data-transfer rates (up to 300 Mbytes per second).

•Perpendicular recording, Tunneling Magnetoresistive (TMR) recording heads and EPRML technology, for increased areal density.

•State-of-the-art cache and on-the-fly error-correction algorithms.

•Native Command Queueing with command ordering to increase performance in demanding applications.

•Full-track multiple-sector transfer capability without local processor intervention.

•Quiet operation.

•SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns.

•Support for S.M.A.R.T. drive monitoring and reporting.

•Supports latching SATA cables and connectors.

DB35.4 Series SATA Product Manual, Rev. C

1

Page 6 Page 8
Image 7
Page 6 Page 8
Contents ST3250310CS DB35.4 Series SataRevision Date Revision historyContents DB35.4 Series Sata Product Manual, Rev. C List of Figures Page Introduction About the Serial ATA interface Specification summary tables Drive specificationsDrive specification ST3250310CS Drive specifications summary for 250 Gbyte modelDB35.4 Series Sata Product Manual, Rev. C Recording and interface technology Default logical geometryLBA mode Formatted capacityTypical seek times msec Read Write Physical characteristicsSeek time Start/stop timesPower specifications Conducted noise Typical current profilesVoltage tolerance Sleep mode Power-management modesActive mode Idle modeEnvironmental specifications Operating vibration VibrationNonoperating vibration Test for Prominent Discrete Tones PDTs Drive A-weighted Sound Power Levels SWL, BAAcoustics emissions Electromagnetic immunityAnnualized Failure Rate AFR Safety certificationReliability Agency certificationAustralian C-Tick N176 Korean RRLFCC verification Corrosive environment Environmental protectionChina Restriction of Hazardous Substances RoHS Directive Handling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensionsDB35.4 Series Sata Product Manual, Rev. C Hot-Plug compatibility Serial ATA Sata interfacePin Function Definition Serial ATA device plug connector pin definitionsSerial ATA connector pin definitions SignalSupported ATA commands Supported ATA commandsCommand name Command code in hex F4H Word Description Value Identify Device commandXx07H 129 Seagate-reserved Bit Word Description if bit is set to Bit WordSet Features command values Set Features commandA.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Technical Support Seagate Technology support servicesInternet Presales SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index ITE Page DB35.4 Series Sata Product Manual, Rev. C Page Seagate Technology LLC

DB35.4 specifications

The Seagate DB35.4 series of hard disk drives (HDDs) represents a significant advancement in data storage solutions for digital video recording and other demanding applications. Designed specifically for use in DVRs, NVRs, and related multimedia production environments, the DB35.4 drives are tailored to meet the rigorous requirements of streaming and recording high-definition video content.

One of the standout features of the DB35.4 series is its optimized design for continuous operation. These drives are built to handle workloads that involve constant read and write cycles, making them ideal for multi-channel recording setups. With a Mean Time Between Failures (MTBF) rating of 1.2 million hours, the drives ensure reliability and durability, essential for critical applications in broadcasting and surveillance.

The DB35.4 series supports advanced technologies, including native command queuing (NCQ), which enhances performance by allowing multiple read and write commands to be processed simultaneously. This results in improved data transfer rates and reduced latency, which are vital for applications requiring swift access to stored content. With capacities ranging from 250 GB to 2 TB, the drives provide ample space for storing extensive video libraries.

In terms of performance, the DB35.4 features a rotational speed of 7200 RPM, combined with a SATA interface that enables high-speed data transfers. The drives usually come equipped with 8 MB or higher cache memory, further boosting their efficiency during heavy data loads. This ensures that users experience smooth playback and recording, minimizing the risk of dropped frames or buffering.

Energy efficiency is another key characteristic of the Seagate DB35.4 series. Designed with power management in mind, these drives consume less energy during operation while still delivering optimal performance. This not only reduces operational costs but also contributes to a more environmentally friendly solution for users looking to maximize their storage capabilities without excessive power consumption.

In summary, the Seagate DB35.4 HDDs stand out for their reliability, performance, and efficiency. With their specialized design for multimedia applications, advanced technologies like NCQ, and a focus on energy savings, the DB35.4 series remains a preferred choice for businesses and individuals aiming to optimize their digital storage solutions in a demanding video-centric world.
Top Page Image Contents