Seagate ST3250623A, 7200.8 PATA, ST3300631A Physical characteristics, Seek time, Start/stop times

2.5Physical characteristics

Drive specification

Maximum height

(mm)26.11

(inches) 1.028

Maximum width

(mm)101.85

(inches) 4.010

Maximum length

(mm)146.99

(inches) 5.787

Max weight

(grams)	635
(pounds)	1.39

2.6Seek time

Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined as follows:

•Track-to-track seek time is an average of all possible single-track seeks in both directions.

•Average seek time is a true statistical random average of at least 5,000 measurements of seeks between random tracks, less overhead.

*Typical seek times (msec)	Read	Write
Track-to-track	0.8	1.0
Average	<11.0	<12.0
Average latency:	4.16	4.16

*Measured in quiet mode

Note. These drives are designed to consistently meet the seek times represented in this manual. Physical seeks, regardless of mode (such as track-to-track and average), are expected to meet or exceed the noted values. However, due to the manner in which these drives are formatted, benchmark tests that include command overhead or measure logical seeks may produce results that vary from these specifications.

2.7Start/stop times

Power-on to Ready (sec)	10 (max)
Standby to Ready (sec)	10 (max)
Ready to spindle stop (sec)	12 (max)

Barracuda 7200.8 PATA Product Manual, Rev. F 11