Seagate ST3300631A, 7200.8 PATA, ST3250623A, ST3400632A manual Description if bit is set to Bit Word

Page 38

Word	Description	Value

128	Security status	0001H
129–159	Seagate-reserved	xxxxH
160–254	ATA-reserved	0000H
255	Integrity word	xxA5H

Note. Advanced Power Management (APM) and Automatic Acoustic Management (AAM) features are not supported

Note. See the bit descriptions below for words 63, 88, and 93 of the Identify Drive data:

Description (if bit is set to 1)

Bit	Word 63

0	Multiword DMA mode 0 is supported.

1	Multiword DMA mode 1 is supported.

2	Multiword DMA mode 2 is supported.

8	Multiword DMA mode 0 is currently active.

9	Multiword DMA mode 1 is currently active.

10	Multiword DMA mode 2 is currently active.

Bit	Word 88

0	Ultra DMA mode 0 is supported.

1	Ultra DMA mode 1 is supported.

2	Ultra DMA mode 2 is supported.

3	Ultra DMA mode 3 is supported.

4	Ultra DMA mode 4 is supported.

5	Ultra DMA mode 5 is supported.

8	Ultra DMA mode 0 is currently active.

9	Ultra DMA mode 1 is currently active.

10	Ultra DMA mode 2 is currently active.

11	Ultra DMA mode 3 is currently active.

12	Ultra DMA mode 4 is currently active.

13	Ultra DMA mode 5 is currently active.

Bit	Word 93

13	1 = 80-conductor cable detected, CBLID above VIH
	0 = 40-conductor cable detected, CBLID below VIL

32	Barracuda 7200.8 PATA Product Manual, Rev. F

Image 38

Contents Barracuda 7200.8 Pata Page Contents Barracuda 7200.8 Pata Product Manual, Rev. F List of Figures Barracuda 7200.8 Pata Product Manual, Rev. F Introduction Barracuda 7200.8 PataBarracuda 7200.8 Pata Product Manual, Rev. F Drive specifications Specification summary tableDrive specifications for 400 Gbyte models Drive specification ST3400832A ST3400632ABarracuda 7200.8 Pata Product Manual, Rev. F Drive specifications for 300 Gbyte models Drive specification ST3300831A ST3300631AFollowing web Drive specifications for 250 and 200 Gbyte models Drive specification ST3250823A ST3250623A ST3200826ABarracuda 7200.8 Pata Product Manual, Rev. F Formatted capacity Default logical geometryLBA mode Recording and interface technologyStart/stop times Physical characteristicsSeek time Power specifications Voltage tolerance Typical current profileConducted noise Idle mode Power-management modesActive mode Sleep modeEnvironmental specifications Nonoperating shock ShockOperating shock VibrationFluid Dynamic Bearing FDB motor acoustics AcousticsElectromagnetic immunity Radio frequency environmentsAgency certification Safety certificationReliability Electromagnetic compatibilityAustralian C-Tick N176 FCC verificationEuropean Union Restriction of Hazardous Substances RoHS Environmental protectionCorrosive environment Configuring and mounting the drive Handling and static discharge precautionsBreather filter hole precautions Breather filter hole locationDrive as master with a non-ATA-compatible slave Jumper settingsMaster/slave configuration Cable-select optionDrive mounting Ultra ATA/100 cableMounting dimensions-top, side and end view Barracuda 7200.8 Pata Product Manual, Rev. F ATA interface signals and connector pins ATA interfaceSupported ATA commands Command name Command code in hexF4H Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Set Features command 4 S.M.A.R.T. commandsCode in features Register A.R.T. command Presales Support Seagate Technology support servicesInternet Technical SupportData Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index Page TMR Barracuda 7200.8 Pata Product Manual, Rev. F Page Seagate Technology LLC