Seagate ST3300631A Shock, Operating shock, Nonoperating shock, Vibration, Operating vibration

Page 22

2.9.5Shock

All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis.

2.9.5.1Operating shock

These drives comply with the performance levels specified in this document when subjected to a maximum operating shock of 63 Gs based on half-sine shock pulses of 2 msec. Shocks should not be repeated more than two times per second.

2.9.5.2Nonoperating shock

The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 300 Gs based on a nonrepetitive half-sine shock pulse of 2 msec duration.

2.9.6Vibration

All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws. Vibration may be applied in the X, Y or Z axis.

2.9.6.1Operating vibration

The following table lists the maximum vibration levels that the drive may experience while meeting the perfor- mance standards specified in this document.

5–22 Hz	Limited displacement

23–350 Hz	0.5 G acceleration

2.9.6.2Nonoperating vibration

The following table lists the maximum nonoperating vibration that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation.

5–22 Hz	Limited displacement

23–350 Hz	5.0 Gs

16	Barracuda 7200.8 PATA Product Manual, Rev. F

Image 22

Contents Barracuda 7200.8 Pata Page Contents Barracuda 7200.8 Pata Product Manual, Rev. F List of Figures Barracuda 7200.8 Pata Product Manual, Rev. F Introduction Barracuda 7200.8 PataBarracuda 7200.8 Pata Product Manual, Rev. F Drive specifications Specification summary tableDrive specifications for 400 Gbyte models Drive specification ST3400832A ST3400632ABarracuda 7200.8 Pata Product Manual, Rev. F Drive specifications for 300 Gbyte models Drive specification ST3300831A ST3300631AFollowing web Drive specifications for 250 and 200 Gbyte models Drive specification ST3250823A ST3250623A ST3200826ABarracuda 7200.8 Pata Product Manual, Rev. F Formatted capacity Default logical geometryLBA mode Recording and interface technologySeek time Physical characteristicsStart/stop times Power specifications Conducted noise Typical current profileVoltage tolerance Idle mode Power-management modesActive mode Sleep modeEnvironmental specifications Nonoperating shock ShockOperating shock VibrationFluid Dynamic Bearing FDB motor acoustics AcousticsElectromagnetic immunity Radio frequency environmentsAgency certification Safety certificationReliability Electromagnetic compatibilityAustralian C-Tick N176 FCC verificationCorrosive environment Environmental protectionEuropean Union Restriction of Hazardous Substances RoHS Configuring and mounting the drive Handling and static discharge precautionsBreather filter hole precautions Breather filter hole locationDrive as master with a non-ATA-compatible slave Jumper settingsMaster/slave configuration Cable-select optionDrive mounting Ultra ATA/100 cableMounting dimensions-top, side and end view Barracuda 7200.8 Pata Product Manual, Rev. F ATA interface signals and connector pins ATA interfaceSupported ATA commands Command name Command code in hexF4H Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Set Features command 4 S.M.A.R.T. commandsCode in features Register A.R.T. command Presales Support Seagate Technology support servicesInternet Technical SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index Page TMR Barracuda 7200.8 Pata Product Manual, Rev. F Page Seagate Technology LLC