Seagate ST31200N/ND/NC, ST3620N/ND/NC manual Inches

34 Hawk 1LP Family Installation Guide, Rev. D

[3]

D

[1] F E

A

C

G

[2]

H

K

B

J

Notes:

[1]Mounting holes three on each side, 6-32 UNC. Max screw length into

side of drive 0.15 in. (3.81 mm). Maximum torque 8 in-lb (.90 NM). Min. thread engagement 0.12 in. (3.0 mm).

[2]Mounting holes four on bottom, 6-32 UNC. Max screw length into bottom of

drive 0.20 in. (5.08 mm). Maximum torque 8 in-lb (.90 NM). Min. thread engagement 0.12 in. (3.0 mm).

[3]Power and interface connectors can extend past the "A" dimension by 0.040 in. (1.02 mm).

	Inches		Millimeters
A	5.74	± .010	145.80	± .25
B	4.00	± .010	101.60	± .25
C	1.00	± .034	25.40	± .86
D	2.362	± .010	60.00	± .25
E	.620	± .010	15.75	± .25
F	4.000	± .010	101.60	± .25
G	.250	± .018	6.35	± .46
H	1.750	± .010	44.45	± .25
J	3.750	± .010	95.25	± .25
K	2.370	± .010	60.20	± .25

Figure 4. Hawk 1LP family N/ND model mounting dimensions (50 pin SCSI I/O connector)