Seagate ST3620N/ND/NC, ST31200N/ND/NC manual

Page 11

Hawk 1LP Family Installation Guide, Rev. D

9

•Low-Level formatting: All Hawk 1LP family drive models are low-level formatted at the factory and do not require this step during installation. If an installed drive is low-level formatted, all user data will be lost.

Note: Seagate Technology assumes no liability for lost user data.

•Partitioning and high level formatting: A drive can be sub-divided into "partitions" which behave as individual drives within the system. Consult the sys- tem documentation for instructions on partitioning and high level formatting. Information is also avail- able in bookstores and libraries.

Image 11

Contents ST3620N/ND/NC Contents Electromagnetic interference EMI considerations IntroductionPage Before you begin Page Page Safety instructions Vorsicht SicherheitsanleitungInstallation Overview Page Product repair information Product repair and return information SeaFAX number 408/438-2620 Technical support servicesSeaTDD telephone number 408/438-5382 SeaBOARD serviceSeaFONE telephone number 408/438-8222 Modem Maximum Location Number Baud Rate BBSModel Hawk 1LP Family product informationPage Scsi interface cable connection Initial set-up informationScsi address selection DC Power connectionTerminator resistor packs Write precompensation and reduced write current Optional parity bit enableRead/Write head auto-park Pin Hawk 1LP family N/ND models 50 pin Scsi I/O Drive configurationHawk 1LP family NC models 80 pin Scsi I/O Drive configurator, Hawk 1LP family N/ND models HDA Scsi I/O Drive configurator for Hawk 1LP family NC drives Hawk 1LP Family Installation Guide, Rev. D RES Hawk 1LP Family Installation Guide, Rev. D TP Position a N family models only Hawk 1LP Family Installation Guide, Rev. D Disc drive mounting Drive installationPage Inches Pin Connector Centerline Mounting holes three on each side Grounding Scsi interface drives Publication Number 77767453, Rev. D