Seagate ST3750528AS, ST31000528AS manual Will display the warranty information for your drive

Page 11

Drive specification	ST31000528AS	ST3750528AS
Vibration, operating	2–22 Hz: 0.25 Gs, Limited displacement
	22–350 Hz: 0.50 Gs
	350–500 Hz: 0.25 Gs

Vibration, nonoperating	5–22 Hz: 2.0 Gs
	22–350 Hz: 5.0 Gs
	350–500 Hz: 2.0 Gs

Drive acoustics, sound power
Idle**	2.6 bels (typical)
	2.7 bels (max)
Seek	2.8 bels (typical)
	3.0 bels (max)

Nonrecoverable read errors	1 per 1014 bits read
Annualized Failure Rate (AFR)	0.32%

Warranty	To determine the warranty for a specific drive, use a web browser to access the following
	web page: support.seagate.com/customer/warranty_validation.jsp
	From this page, click on the “Verify Your Warranty” link. You will be asked to provide the
	drive serial number, model number (or part number) and country of purchase. The system
	will display the warranty information for your drive.

Contact start-stop cycles	50,000 at 25°C, 50% rel. humidity

Supports Hotplug operation per the	Yes
Serial ATA Revision 2.5 specification

*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.

**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.

Barracuda 7200.12 Serial ATA Product Manual, Rev. B

5

Image 11

Contents Barracuda 7200.12 Serial ATA Revision Date Sheets affected or comments Revision historyContents Barracuda 7200.12 Serial ATA Product Manual, Rev. B List of Figures Page Introduction About the Serial ATA interface Drive specifications Drive specifications summary for 1000 and 750 Gbyte models Will display the warranty information for your drive Drive specifications summary for 500 Gbyte models Tem will display the warranty information for your drive Drive specifications summary for 250 Gbyte models Will display the warranty information for your drive Cylinders Read/write heads Sectors per track 16,383 Default logical geometryLBA mode Formatted capacityRecording and interface technology Physical characteristics750 GB models 500, 320, 250 and 160 GB models Seek timeStart/stop times Typical seek times msec Read WritePower specifications Sleep mode Power-management modesActive mode Idle modeEnvironmental specifications 500, 320, 250 and 160 GB models ShockOperating shock Nonoperating shock 750 GB modelsTest for Prominent Discrete Tones PDTs AcousticsElectromagnetic immunity Fluid Dynamic Bearing FDB motor acousticsElectromagnetic compatibility Safety certificationReliability Agency certificationFCC verification Korean RRLAustralian C-Tick N176 Corrosive environment Environmental protectionHandling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensions 1000 and 750 GB modelsMounting dimensions 500, 320, 250 and 160 GB models Hot-Plug compatibility Serial ATA Sata interfacePin Function Definition Serial ATA device plug connector pin definitionsSerial ATA connector pin definitions SignalCommand name Command code in hex Supported ATA commandsSupported ATA commands F3H Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordShall be cleared to Set Features command values Set Features commandCode in features register A.R.T. command 3 S.M.A.R.T. commandsM.A.R.T. commands Technical Support Seagate Technology support servicesPresales Support Data Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index ITE Page Barracuda 7200.12 Serial ATA Product Manual, Rev. B Page Seagate Technology LLC