Seagate ST3500410AS, ST31000528AS manual Tem will display the warranty information for your drive

Page 13

Drive specification	ST3500418AS and ST3500410AS	ST3320418AS
Vibration, operating	2–22 Hz: 0.25 Gs, Limited displacement
	22–350 Hz: 0.50 Gs
	350–500 Hz: 0.25 Gs

Vibration, nonoperating	5–22 Hz: 2.0 Gs
	22–350 Hz: 5.0 Gs
	350–500 Hz: 2.0 Gs

Drive acoustics, sound power
Idle**	2.6 bels (typical)
	2.7 bels (max)
Seek	2.8 bels (typical)
	3.0 bels (max)

Nonrecoverable read errors	1 per 1014 bits read
Annualized Failure Rate (AFR)	0.32%

Warranty	To determine the warranty for a specific drive, use a web browser to access the following
	web page: support.seagate.com/customer/warranty_validation.jsp
	From this page, click on the “Verify Your Warranty” link. You will be asked to provide the
	drive serial number, model number (or part number) and country of purchase. The sys-
	tem will display the warranty information for your drive.

Contact start-stop cycles	50,000 at 25°C, 50% rel. humidity

Supports Hotplug operation per the	Yes
Serial ATA Revision 2.5 specification

*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.

**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.

Barracuda 7200.12 Serial ATA Product Manual, Rev. B

7

Image 13

Contents Barracuda 7200.12 Serial ATA Revision Date Sheets affected or comments Revision historyContents Barracuda 7200.12 Serial ATA Product Manual, Rev. B List of Figures Page Introduction About the Serial ATA interface Drive specifications Drive specifications summary for 1000 and 750 Gbyte models Will display the warranty information for your drive Drive specifications summary for 500 Gbyte models Tem will display the warranty information for your drive Drive specifications summary for 250 Gbyte models Will display the warranty information for your drive LBA mode Default logical geometryFormatted capacity Cylinders Read/write heads Sectors per track 16,383Recording and interface technology Physical characteristicsStart/stop times Seek timeTypical seek times msec Read Write 750 GB models 500, 320, 250 and 160 GB modelsPower specifications Active mode Power-management modesIdle mode Sleep modeEnvironmental specifications Operating shock ShockNonoperating shock 750 GB models 500, 320, 250 and 160 GB modelsElectromagnetic immunity AcousticsFluid Dynamic Bearing FDB motor acoustics Test for Prominent Discrete Tones PDTsReliability Safety certificationAgency certification Electromagnetic compatibilityAustralian C-Tick N176 Korean RRLFCC verification Corrosive environment Environmental protectionHandling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensions 1000 and 750 GB modelsMounting dimensions 500, 320, 250 and 160 GB models Hot-Plug compatibility Serial ATA Sata interfaceSerial ATA connector pin definitions Serial ATA device plug connector pin definitionsSignal Pin Function DefinitionSupported ATA commands Supported ATA commandsCommand name Command code in hex F3H Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordShall be cleared to Set Features command values Set Features commandM.A.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Presales Support Seagate Technology support servicesTechnical Support Data Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index ITE Page Barracuda 7200.12 Serial ATA Product Manual, Rev. B Page Seagate Technology LLC