Seagate ST31000528AS, ST3160318AS, ST3250318AS, ST3320418AS manual Environmental specifications

Page 21

2.8Environmental specifications

2.8.1Ambient temperature

Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Actual drive case temperature should not exceed 69°C (156°F) within the operating ambient conditions.

Operating:

0° to 60°C (32° to 140°F)

 

 

Nonoperating:

–40° to 70°C (–40° to 158°F)

 

 

2.8.2Temperature gradient

Operating:

20°C per hour (68°F per hour max), without condensation

 

 

Nonoperating:

30°C per hour (86°F per hour max)

 

 

2.8.3Humidity

2.8.3.1Relative humidity

Operating:

5% to 95% noncondensing (30% per hour max)

 

 

Nonoperating:

5% to 95% noncondensing (30% per hour max)

 

 

2.8.3.2Wet bulb temperature

Operating:

37.7°C (99.9°F max)

 

 

Nonoperating:

40°C (104°F max)

 

 

2.8.4Altitude

Operating:

–304.8 m to 3,048 m (–1000 ft. to 10,000+ ft.)

 

 

Nonoperating:

–304.8 m to 12,192 m (–1000 ft. to 40,000+ ft.)

 

 

Barracuda 7200.12 Serial ATA Product Manual, Rev. B

15

Image 21
Contents Barracuda 7200.12 Serial ATA Revision Date Sheets affected or comments Revision historyContents Barracuda 7200.12 Serial ATA Product Manual, Rev. B List of Figures Page Introduction About the Serial ATA interface Drive specifications Drive specifications summary for 1000 and 750 Gbyte models Will display the warranty information for your drive Drive specifications summary for 500 Gbyte models Tem will display the warranty information for your drive Drive specifications summary for 250 Gbyte models Will display the warranty information for your drive LBA mode Default logical geometryFormatted capacity Cylinders Read/write heads Sectors per track 16,383Recording and interface technology Physical characteristicsStart/stop times Seek timeTypical seek times msec Read Write 750 GB models 500, 320, 250 and 160 GB modelsPower specifications Active mode Power-management modesIdle mode Sleep modeEnvironmental specifications Operating shock ShockNonoperating shock 750 GB models 500, 320, 250 and 160 GB modelsElectromagnetic immunity AcousticsFluid Dynamic Bearing FDB motor acoustics Test for Prominent Discrete Tones PDTsReliability Safety certificationAgency certification Electromagnetic compatibilityKorean RRL Australian C-Tick N176FCC verification Corrosive environment Environmental protectionHandling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensions 1000 and 750 GB modelsMounting dimensions 500, 320, 250 and 160 GB models Hot-Plug compatibility Serial ATA Sata interfaceSerial ATA connector pin definitions Serial ATA device plug connector pin definitionsSignal Pin Function DefinitionSupported ATA commands Supported ATA commandsCommand name Command code in hex F3H Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordShall be cleared to Set Features command values Set Features command3 S.M.A.R.T. commands M.A.R.T. commandsCode in features register A.R.T. command Seagate Technology support services Presales SupportTechnical Support Warranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Index ITE Page Barracuda 7200.12 Serial ATA Product Manual, Rev. B Page Seagate Technology LLC