Seagate ST336854FC, ST3146954FC manual Reliability specifications, Error rates, Recoverable Errors

Page 29
5.0Reliability specifications
Less than 10 errors in 1012 bits transferred (OEM default settings) Less than 1 sector in 1015 bits transferred
Less than 1 sector in 1021 bits transferred
Less than 1 error in 1012 bits transferred with minimum receive eye. Less than 1 error in 1014 bits transferred with typical receive eye. See Section 9.6.4, "FC Differential input." on page 72 1,400,000 hours
None required

5.0Reliability specifications

The following reliability specifications assume correct host and drive operational interface, including all inter- face timings, power supply voltages, environmental requirements and drive mounting constraints.

Seek error rate:Less than 10 errors in 108 seeks

Read Error Rates1 Recovered Data Unrecovered Data Miscorrected Data

Interface error rate:

MTBF:

Preventive maintenance:

1.Error rate specified with automatic retries and data correction with ECC enabled and all flaws reallocated.

5.1Error rates

The error rates stated in this manual assume the following:

The drive is operated in accordance with this manual using DC power as defined in paragraph 6.2, "DC power requirements."

Errors caused by host system failures are excluded from error rate computations.

Assume random data.

Default OEM error recovery settings are applied. This includes AWRE, ARRE, full read retries, full write retries and full retry time.

5.1.1Recoverable Errors

Recovereable errors are those detected and corrected by the drive, and do not require user intervention.

Recoverable Data errors will use correction, although ECC on-the-fly is not considered for purposes of recov- ered error specifications.

Recovered Data error rate is determined using read bits transferred for recoverable errors occurring during a read, and using write bits transferred for recoverable errors occurring during a write.

5.1.2Unrecoverable Errors

Unrecoverable Data Errors (Sense Key = 03h) are specified at less than 1 sector in error per 1015 bits trans- ferred. Unrecoverable Data Errors resulting from the same cause are treated as 1 error for that block.

Cheetah 15K.4 FC Product Manual, Rev. B

17

Image 29
Contents ST3146954FC ST373554FC ST336854FC Cheetah 15K.4 FCPage ST3146954FC ST373554FC ST336854FC March Rev. A Revision status summary sheet07/15/05 Rev. B DraftPage 4.0 Performance characteristics Contents5.0 Reliability specifications 6.0 Physical/electrical specifications9.0 Interface requirements 7.0 Defect and error management8.0 Installation 10.0 Seagate Technology support services Cheetah 15K.4 FC Product Manual, Rev. B List of Figures Page Figure 1. Cheetah 15K.4 FC family disc drive 1.0 ScopeCheetah 15K.4 FC Product Manual, Rev. B 2.1 Standards 2.0 Applicable standards and reference documentation2.1.1 Electromagnetic compatibility 2.1.1.1 Electromagnetic susceptibilityElectromagnetic compliance for the European Union 2.1.2 Electromagnetic complianceAustralian C-Tick Korean MICFibre Channel Interface Manual Specification for Acoustic Test Requirement and Procedures2.2 Reference documents Cheetah 15K.4 FC Product Manual, Rev. B 3.0 General description 3.2 Media description 3.1 Standard features3.4 Reliability 3.3 Performance3.5 Formatted capacities 3.5.1 Programmable drive capacity3.8 User-installed accessories 3.6 Factory-installed accessories3.7 Factory-installed options 4.1 Internal drive characteristics 4.0 Performance characteristics4.2 Seek performance characteristics 4.2.1 Access timeGeneral performance characteristics 4.2.2 Format command execution time minutes4.3 Start/stop time 4.4 Prefetch/multi-segmented cache control4.5 Cache operation 4.5.2 Prefetch operation 4.5.1 Caching write dataCheetah 15K.4 FC Product Manual, Rev. B Cheetah 15K.4 FC Product Manual, Rev. B 5.1 Error rates 5.0 Reliability specifications5.1.1 Recoverable Errors 5.1.2 Unrecoverable Errors5.1.3 Seek errors 5.2 Reliability and service5.1.4 Interface errors 5.2.2 Preventive maintenanceControlling S.M.A.R.T 5.2.3 Hot plugging the drive5.2.4 S.M.A.R.T Performance impact Fully-enabled delayMaximum processing delay On-line only delayDescription Parameter Code5.2.6 Drive Self Test DST 5.2.6.1 DST failure definition5.2.6.2 Implementation 5.2.6.2.1 State of the drive prior to testing5.2.6.2.2 Invoking DST 5.2.6.2.3 Short and extended tests5.2.6.2.4 Log page entries 5.2.7 Product warranty5.2.6.2.5 Abort ShippingProduct repair and return information 6.2 DC power requirements 6.0 Physical/electrical specifications6.1 AC power requirements 3 See +12V current profile in Figure 6.2.2 Power sequencing General DC power requirement notes6.2.1 Conducted noise immunity 6.2.3 Current profilesFigure 3. Typical ST3146954FC drive, 2 Gbit, +5V current profile Figure 2. Typical ST3146954FC drive, 2 Gbit, +12V current profileFigure 5. Typical ST373554FC drive +5V current profile Figure 4. Typical ST373554FC drive +12V current profileFigure 7. Typical ST336854FC drive +5V current profile Figure 6. Typical ST336854FC drive +12V current profileST3146954FC 6.3 Power dissipationPower watts ST373554FCST336854FC 6.4.2 Relative humidity 6.4 Environmental limits6.4.1 Temperature a. Operating 6.4.4.1 Shock 6.4.3 Effective altitude sea level a. Operating6.4.4 Shock and vibration Package size Packaged/product weightDrop height Figure 12. Recommended mounting6.4.4.2 Vibration a. Operating-normal 6.4.5 Air cleanliness6.4.6 Acoustics 6.4.7 Electromagnetic susceptibilityFigure 13. Mounting configuration dimensions 6.5 Mechanical specifications7.2 Drive error recovery procedures 7.0 Defect and error management7.1 Drive internal defects/errors Cheetah 15K.4 FC Product Manual, Rev. B 7.3 FC-AL system errors 7.4.1 Media Pre-Scan 7.4 Background Media Scan8.1 Drive ID/option selection 8.0 InstallationFigure 14. Physical interface 8.2 LED connectionsFigure 15. LED indicator connector 8.4 Cooling 8.2.1 J6 connector requirements8.3 Drive orientation K x X = F 15lb = 67N 8.5 Drive mounting8.6 Grounding 9.0 Interface requirements 9.1 FC-AL features9.1.1 Fibre Channel link service frames 9.1.3 Fibre Channel task management responses 9.1.2 Fibre Channel task management functionsFibre Channel SCSI FCP task management functions Task nameBytes 9.1.4 Fibre Channel port loginNPort login PLOGI payload 9.1.6 Fibre Channel Process Login 9.1.5 Fibre Channel port login acceptNPort Login Accept ACC payload Process Login PLRI payload9.1.8 Fibre Channel fabric login 9.1.7 Fibre Channel Process Login AcceptProcess Login Accept ACC payload Fabric Login FLOGI payloadFabric Login Accept ACC payload 9.1.9 Fibre Channel fabric accept login9.1.10 Fibre Channel Arbitrated Loop options 9.2 Dual port supportTable 16 Supported commands 9.3 SCSI commands supportedCommand code Command nameTable 16 Supported commands continued Command code 3 Reference Mode Sense command 1Ah for mode pages supported 9.3.2 Mode Sense data 9.3.1 Inquiry data3. Current values CHG = Changeable bits indicates if default value is changeable4. Changeable values Definitions SAV = Current saved valueMODE SENSE 10 BYTE HEADER DATA Cheetah 15K.4 FC Product Manual, Rev. B Cheetah 15K.4 FC Product Manual, Rev. B Miscellaneous features 9.4 Miscellaneous operating features and conditionsFeature or condition Miscellaneous status9.5.1.1 Physical description 9.5.1 Physical characteristics9.5 FC-AL physical interface Features 9.5.2 Connector requirementsFC-AL SCA device connector dimensions Figure 20. J6 connector dimensions9.5.4 Pin descriptions 9.5.3 Electrical description9.5.7 Fault LED Out 9.5.6 Power9.5.5 FC-AL transmitters and receivers Figure 21. FC-AL transmitters and receivers9.5.8 Active LED Out 9.5.9 Enable port bypass signals9.5.10 Motor start controls Normal command activity9.5.11 SEL6 through SEL0 ID lines 9.5.11.1 Parallel Enclosure Services Interface ESIArbitrated loop physical address ALPA values SettingALPA SEL IDTTL input characteristics 9.6 Signal characteristics9.5.12 Device control codes 9.6.19.6.3 FC Differential output 9.6.2 LED driver signals9.6.4 FC Differential input Bit Time Vout mv XMIT EyeEye diagram data values Receive eye diagramVin mv 941 ps 659 ps 376 psCheetah 15K.4 FC Product Manual, Rev. B Online services 10.0 Seagate Technology support servicesSeagate Service Centers InternetUSA/Canada/Latin America support services Seagate Service Centers Customer Service OperationsWarranty Service Data Recovery ServicesAfrica/Middle East support services European support servicesFAX services-All Europe toll call Warranty ServiceAsia/Pacific support services Numerics IndexDownload microcode with offsets and save mode 7 front panel 38 FS 49, 50, 52 function pin descriptions 66 PN 49 mounting 46 holes 46 orientationsNN 49 Self-Monitoring Analysis and Reporting Technology 9 UI 50, 51 unformatted SMP = 1 in Mode Select command 63 SO 49LED driver 72 single-unit shipping pack kit 10 SMART 9 Page Seagate Technology LLC