Seagate ST336854FC, ST3146954FC manual Mechanical specifications, Mounting configuration dimensions

6.5Mechanical specifications

The following nominal dimensions are exclusive of the decorative front panel accessory. However, dimensions of the front panel are shown in figure below. Refer to Figure 13 for detailed mounting configuration dimensions. See Section 8.5, “Drive mounting.”

Height:	1.000 in	25.4 mm
Width:	4.000 in	101.6 mm
Depth:	5.75 in	146.05 mm
Weight:	1.5 pounds	0.68 kilograms

B

// T -Z- S REF

A

-Z-

M

U -X-

P

F [1]

H

L

[1]

R REF

N -X-

C

-X-

J

K

-Z-

Notes:

[1]Mounting holes are 6-32 UNC 2B, three on each side and four on the bottom. Max screw penetration into side of drive is 0.15 in. (3.81 mm). Max screw tightening torque is 6.0 in-lb (3.32 nm) with minimum full thread engagement of 0.12 in. (3.05 mm).

	Dimension Table
	Inches		Millimeters
A	1.028	max	26.10	max
B	5.787	max	147.00	max
C	4.000	± .010	101.60	± .25
D	3.750	± .010	95.25	± .25
E	0.125	± .010	3.18	± .25
F	1.750	± .010	44.45	± .25
H	1.122	± .020	28.50	± .50
J	4.000	± .010	101.60	± .25
K	0.250	± .010	6.35	± .25
L	1.638	± .010	41.60	± .25
M	0.181		4.60
N	.040		1.02
P	1.625	± .020	41.28	± .50
R	1.618		41.10
S	0.276	± .040	7.00	± 1.02
T	.015	max	0.38	max
U	.015	max	0.38	max

E

D

Figure 13. Mounting configuration dimensions

38 Cheetah 15K.4 FC Product Manual, Rev. B