Seagate ST3146755SS, ST3300555SS manual Reliability specifications, Error rates, Recoverable Errors

Page 21

5.0Reliability specifications

The following reliability specifications assume correct host and drive operational interface, including all inter- face timings, power supply voltages, environmental requirements and drive mounting constraints.

Seek error rate:

Less than 10 errors in 108 seeks

Read Error Rates1

 

 

Recovered Data

Less than 10 errors in 1012 bits transferred (OEM default settings)

Unrecovered Data

Less than 1 sector in 1016

bits transferred

Miscorrected Data

Less than 1 sector in 1021

bits transferred

Interface error rate:

Less than 1 error in 1012 bits transferred

MTBF

1,400,000 hours

 

Preventive maintenance:

None required

 

1.Error rate specified with automatic retries and data correction with ECC enabled and all flaws reallocated.

5.1Error rates

The error rates stated in this manual assume the following:

•The drive is operated per this specification using DC power as defined in this manual (see Section 6.2).

•Errors caused by host system failures are excluded from error rate computations.

•Assume random data.

•Default OEM error recovery settings are applied. This includes AWRE, ARRE, full read retries, full write retries and full retry time.

5.1.1Recoverable Errors

Recovereable errors are those detected and corrected by the drive, and do not require user intervention.

Recoverable Data errors will use correction, although ECC on-the-fly is not considered for purposes of recov- ered error specifications.

Recovered Data error rate is determined using read bits transferred for recoverable errors occurring during a read, and using write bits transferred for recoverable errors occurring during a write.

5.1.2Unrecoverable Errors

Unrecoverable Data Errors (Sense Key = 03h) are specified at less than 1 sector in error per 1016 bits trans- ferred. Unrecoverable Data Errors resulting from the same cause are treated as 1 error for that block.

Cheetah T10 SAS Product Manual, Rev. A

15

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Cheetah T10 SAS Page Contents Installation Defect and error managementSeagate Technology support services Interface requirementsList of Figures Cheetah T10 SAS Product Manual, Rev. a Cheetah T10 SAS disc drive ScopeCheetah T10 SAS Product Manual, Rev. a Standards Standards, compliance and reference documentsElectromagnetic compatibility Electromagnetic susceptibilityCompliance Reference documents Cheetah T10 SAS Product Manual, Rev. a General description Standard features Media descriptionPerformance Reliability Factory-installed accessoriesFormatted capacities Programmable drive capacityUser-installed accessories Options factory installedInternal drive characteristics Performance characteristicsAccess time Seek timeFormat command execution time minutes General performance characteristicsStart/stop time Cache operation Prefetch/multi-segmented cache controlPrefetch operation Caching write dataError rates Reliability specificationsRecoverable Errors Unrecoverable ErrorsSeek errors Reliability and serviceInterface errors Preventive maintenance4 S.M.A.R.T Hot plugging the driveControlling S.M.A.R.T Performance impactDetermining rate Reporting controlPredictive failures Thermal monitorPrimary Temperature Temperature Log Page 0DhReference Temperature Parameter Code DescriptionInvoking DST State of the drive prior to testingShort and extended tests Short test Function Code 001bAbort Product warrantyShipping Product repair and return informationCheetah T10 SAS Product Manual, Rev. a AC power requirements Physical/electrical specificationsDC power requirements ST3300555SS DC power requirementsST373355SS DC power requirements ST3146755SS DC power requirementsST3146755SS Gbit mode Amps ST373355SS Gbit mode AmpsPower sequencing General DC power requirement notesConducted noise immunity Current profilesTypical ST3300555SS drive current profiles Typical ST3146755SS drive current profiles Typical ST373355SS drive current profiles Power dissipation ST3300555SS in 3 Gbit operationST3300555SS in 1.5 Gbit operation ST3146755SS in 1.5 Gbit operation ST3146755SS in 3 Gbit operationST373355SS in 1.5 Gbit operation ST373355SS in 3 Gbit operationEnvironmental limits Temperature a. OperatingEffective altitude sea level a. Operating Relative humidityShock and vibration ShockRecommended mounting Package size Packaged/product weight Drop heightAir cleanliness Vibration a. Operating-normalCorrosive environment Acoustics Mechanical specificationsDefect and error management Drive internal defects/errorsDrive error recovery procedures Write retry count LBA cumulative, msec SAS system errors Background Media ScanMedia Pre-Scan Idle Read After Write Deferred Auto-ReallocationDrive orientation InstallationAir flow CoolingGrounding Drive mountingCheetah T10 SAS Product Manual, Rev. a Interface requirements SAS featuresDual port support Scsi commands supported Commands supported by Cheetah T10 SAS family drivesCommand name Command code Supported Commands supported by Cheetah T10 SAS family drives Commands supported by Cheetah T10 SAS family drives Commands supported by Cheetah T10 SAS family drives Inquiry data Mode Sense dataCheetah T10 SAS inquiry data Bytes Data hexPage Mode Pages ST3300555SS Mode Sense dataST3146755SS Mode Sense data ST373355SS Mode Sense data Miscellaneous features Miscellaneous operating features and conditionsSupported Feature or condition Miscellaneous statusSAS physical interface Datum B Connector requirements Physical characteristicsElectrical description Pin Signal name Signal typePin descriptions SAS pin descriptionsPower Signal characteristicsSAS transmitters and receivers Ready LED OutDifferential signals LED drive signalGeneral interface characteristics Eye masks Eye masks overviewJitter tolerance masks Receive eye maskAbsolute amplitude Normalized time in UISinusoidal Peak-toJitter Frequency in kHzSignal characteristica Units Gbps Transmitter signal characteristicsSignal characteristic Units Gbps Receiver signal characteristicsMaximum allowable jitter Gbps m, n Deterministic jitterqReceiver jitter tolerance Impedance specificationsCompliant jitter test pattern Cjtpat Impedance requirements Sheet 1Transmitter characteristics Impedance requirements Sheet 2Electrical TxRx connections = -5,437dB Shows the zero-length test load Receiver characteristics Cheetah T10 SAS Product Manual, Rev. a Warranty Service Seagate Technology support servicesInternet MySeagate Spp.seagate.com Presales SupportData Recovery Services Data Recovery Services Authorized Service CentersFAX services-All Europe toll call Call center Presales and Technical Support Warranty ServiceToll-free support numbers Africa/Middle East support services Numerics IndexPage SAS See also cooling Page Seagate Technology LLC

ST3300555SS, ST3146755SS, ST373355SS specifications

The Seagate ST373355SS, ST3146755SS, and ST3300555SS represent a range of high-performance hard drives designed for enterprise applications, particularly in server environments requiring reliability, speed, and high capacity.

The ST373355SS is a 73.5 GB SCSI hard drive operating at 15,000 RPM, which ensures rapid data access and superior performance, making it ideal for transactional applications and data-intensive tasks. With its 4 MB cache, the drive leverages fast read and write speeds, enhancing overall system responsiveness. The SCSI interface, operating at 80 MB/s, allows for high-speed data transfers, making it a suitable choice for demanding environments where quick access to information is critical. Its hot-swappable feature enables maintenance without shutting down the system, maximizing uptime and productivity.

The ST3146755SS, with a capacity of 146.8 GB, builds on the performance of its predecessor while introducing improvements in data handling and reliability. Operating at the same impressive 15,000 RPM, this model also features a 16 MB cache that greatly improves data throughput and access speed. The drive is designed to reduce latency, which is crucial for applications where timing is everything. It is equipped with advanced error recovery features and Seagate’s innovative PowerTrim technology, which improves power efficiency during read and write operations. The ST3146755SS also features a higher mean time between failures (MTBF), underscoring its reliability in high-demand environments.

Lastly, the ST3300555SS offers even greater capacity with 300 GB. This drive maintains the 15,000 RPM rotation speed and benefits from a 16 MB cache, providing a balance of speed and storage capacity. Its advanced SCSI interface supports not just speed but also data integrity, ensuring consistent performance during extensive data transfers. The drive is designed to handle workloads naturally associated with enterprise servers, data warehouses, and video editing applications. Its rugged build supports continuous operation and is tested for high-temperature environments to ensure durability.

In summary, the Seagate ST373355SS, ST3146755SS, and ST3300555SS hard drives are engineered for enterprise environments, combining impressive RPM speeds, significant storage capacities, and advanced technologies to deliver reliability, performance, and efficiency for critical applications. These hard drives represent Seagate's commitment to providing solutions that meet the rigorous demands of modern data environments.
Top Page Image Contents