Wyse Technology WintermTM 9000 manual Mounting and Connecting the Terminal

5

Mounting and Connecting the Terminal

The Quick Start Guide included in the shipping carton provides instructions for mounting and connecting the terminal. The terminal may be placed on a desktop, or it may be mounted on a wall using an optional wall-mount bracket available from Wyse Technology.

Caution

Mount and connect the terminal only as directed in the Quick Start Guide (and in the wall-mount bracket instructions if used). Be sure that there is sufficient space around the terminal for ventilation. Follow all precautions listed in the Quick Start Guide.

Note

On the Model 9235LE the amber power LED may stay on for up to a minute after plugging power into the unit. The user should not press the power button to boot up until the amber light goes out.

The following items are provided in the box with each terminal and should be used with the installation:

•Keyboard and mouse (may or may not be included)

•Power cord (may or may not be included)

•Power supply

•Noise suppressor (ferrite bead)

•Desktop mounting stand (if required)

•Quick Start Guide

Caution

To ensure regulatory compliance, use only the power supply included in the shipping carton, or a Wyse-approved equivalent, with the terminal. Also, the noise suppressor (ferrite bead) included in the box with the terminal must be installed on the network cable as described in the accompanying instructions. Refer to the regulatory notices in the front matter of this document for details.

Note

A 3-button wheel mouse may be used.