Seagate ST340015ACE manual Reliability, Performance Reference Test Description Level Standard

Page 25

Barracuda 5400.1 Product Manual, Rev. G

17

2.12Electromagnetic immunity

When properly installed in a representative host system, the drive operates without errors or degradation in performance when subjected to the radio frequency (RF) environments defined in the following table:

		Performance	Reference
Test	Description	level	standard


Electrostatic	Contact, HCP, VCP: ± 4 kV;	B	EN 61000-4-2: 95
discharge	Air: ± 8 kV

Radiated RF	80 to 1,000 MHz, 3 V/m,	A	EN 61000-4-3: 96
immunity	80% AM with 1 kHz sine		ENV 50204: 95
	900 MHz, 3 V/m, 50% pulse
	modulation @ 200 Hz

Electrical fast	± 1 kV on AC mains, ± 0.5	B	EN 61000-4-4: 95
transient	kV on external I/O

Surge	± 1 kV differential, ± 2 kV	B	EN 61000-4-5: 95
immunity	common, AC mains

Conducted	150 kHz to 80 MHz, 3 Vrms,	A	EN 61000-4-6: 97
RF immunity	80% AM with 1 kHz sine

Voltage dips,	0% open, 5 seconds	C	EN 61000-4-11: 94
interrupts	0% short, 5 seconds	C
	40%, 0.10 seconds	C
	70%, 0.01 seconds	B

2.13	Reliability
Nonrecoverable read errors		1 per 1014 bits read, max.
Mean time between failures		600,000 power-on hours .
		(nominal power, 25°C ambient temperature)
Service life		The drive shall have a useful service life of five years.
Contact start-stop cycles		50,000 cycles.
		(at nominal voltage and temperature, with 60 cycles
		per hour and a 50% duty cycle)
Preventive maintenance		None required.

Image 25

Contents Page Page Page Page Contents Barracuda 5400.1 Product Manual, Rev. G Seagate Technology support servicesList of Figures Barracuda 5400.1 Product Manual, Rev. G Introduction Barracuda 5400.1 Product Manual, Rev. G Specification summary table Drive specificationsDrive specification ST340015ACE 50,000 Humidity SeaShield LBA mode Default logical geometryPhysical organization ATA Physical characteristicsSeek time Power specificationsStart/stop times Typical seek times msec Read WriteSpinup power Barracuda 5400.1 Product Manual, Rev. G Power consumptionSeek mode Read/write power and currentBarracuda 5400.1 Product Manual, Rev. G Typical 5V startup and operation current profile Active mode Power-management modesIdle mode Conducted noiseIdle and Standby timers Sleep modeEnvironmental specifications Ambient temperature Wet bulb temperature Temperature gradientHumidity Relative humidity AltitudeOperating shock Barracuda 5400.1 Product Manual, Rev. G ShockNonoperating shock VibrationAcoustics Acoustic modeFluid Dynamic Bearing FDB motor acoustics Model Idle Quiet seek Performance seekPerformance Reference Test Description Level Standard ReliabilityElectromagnetic compatibility Agency certification Safety certificationKorean RRL FCC verification Barracuda 5400.1 Product Manual, Rev. G Handling and static discharge precautions Configuring and mounting the driveBreather filter hole location Breather filter hole precautionsCable select option Drive as master with a non-ATA-compatible slaveDrive mounting Ultra ATA/100 cableMaster SlaveMounting dimensions-top, side and end view Barracuda 5400.1 Product Manual, Rev. G ATA interface ATA interface signals and connector pinsO pins and supported ATA signals EC H Command name Command code in hex ATA-standard commandsCommand name Command code in hex ATA-standard security commands Identify Device command0C5AH Word Description ValueXxxxH Xx3FH Description if bit is set to Bit 0CH Set Features commandF1H Report full capacity available Code in features Register A.R.T. command 4 S.M.A.R.T. commandsInternet MySeagate Seagate Technology support services Online Services40Barracuda 5400.1 Product Manual, Rev. G Automated Phone ServicesUSA/Canada/Latin America Support Services Africa/Middle East Support Services European Support ServicesAsia/Pacific Support Services Barracuda 5400.1 Product Manual, Rev. G Index GMR Barracuda 5400.1 Product Manual, Rev. G 48Barracuda 5400.1 Product Manual, Rev. G Page Seagate Technology LLC

Related manuals

Manual 2 pages 30.5 Kb