Seagate ST340015ACE manual 50,000 Humidity SeaShield

Page 13

Barracuda 5400.1 Product Manual, Rev. G		5

Drive specification	ST340015ACE

Idle mode (typical)	5.0 watts

Standby mode (typical)	1.4 watts

Sleep mode (typical)	1.0 watts

Voltage tolerance (including noise)	5V +/- 5%; 12V +/- 10%

Ambient temperature	0° to 60°C (operating)
	–40° to 70°C (nonoperating)

Temperature gradient (°C per hour max)	20°C (operating)

Relative humidity	5% to 90% (operating)
	5% to 95% (nonoperating)

Relative humidity gradient	30% per hour max

Wet bulb temperature (°C max)	33 (operating)
	40 (nonoperating)

Altitude, operating	–60.96 m to 3,048 m
	(–200 ft to 10,000+ ft)

Altitude, nonoperating	–60.96 m to 12,192 m
(below mean sea level, max)	(–200 ft to 40,000+ ft)
Shock, operating (Gs max at 2 msec)	63

Shock, nonoperating (Gs max at 1 and 2	350
msec)

Vibration, operating	0.5 Gs (0 to peak, 22–350 Hz)

Vibration, nonoperating	5 Gs (0 to peak, 22–350 Hz)

Drive acoustics
Sound power (bels)

Idle*	2.6 (typical), 2.8 (max)
Quiet Seek	2.7 (typical), 2.9 (max)
Performance Seek	2.8 (typical), 3.0 (max)

Nonrecoverable read errors	1 per 1014 bits read
Mean time between failures (power-on	600,000
hours)

Service life	5 years

Contact start-stop cycles (25°C, 40% relative	50,000
humidity)

SeaShield	No

*During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.

Image 13

Contents Page Page Page Page Contents Barracuda 5400.1 Product Manual, Rev. G Seagate Technology support servicesList of Figures Barracuda 5400.1 Product Manual, Rev. G Introduction Barracuda 5400.1 Product Manual, Rev. G Specification summary table Drive specificationsDrive specification ST340015ACE 50,000 Humidity SeaShield LBA mode Default logical geometryPhysical organization ATA Physical characteristicsSeek time Power specificationsStart/stop times Typical seek times msec Read WriteSpinup power Barracuda 5400.1 Product Manual, Rev. G Power consumptionSeek mode Read/write power and currentBarracuda 5400.1 Product Manual, Rev. G Typical 5V startup and operation current profile Active mode Power-management modesIdle mode Conducted noiseIdle and Standby timers Sleep modeEnvironmental specifications Ambient temperature Wet bulb temperature Temperature gradientHumidity Relative humidity AltitudeOperating shock Barracuda 5400.1 Product Manual, Rev. G ShockNonoperating shock VibrationAcoustics Acoustic modeFluid Dynamic Bearing FDB motor acoustics Model Idle Quiet seek Performance seekPerformance Reference Test Description Level Standard ReliabilityElectromagnetic compatibility Agency certification Safety certificationKorean RRL FCC verification Barracuda 5400.1 Product Manual, Rev. G Handling and static discharge precautions Configuring and mounting the driveBreather filter hole location Breather filter hole precautionsCable select option Drive as master with a non-ATA-compatible slaveDrive mounting Ultra ATA/100 cableMaster SlaveMounting dimensions-top, side and end view Barracuda 5400.1 Product Manual, Rev. G ATA interface ATA interface signals and connector pinsO pins and supported ATA signals EC H Command name Command code in hex ATA-standard commandsCommand name Command code in hex ATA-standard security commands Identify Device command0C5AH Word Description ValueXxxxH Xx3FH Description if bit is set to Bit 0CH Set Features commandF1H Report full capacity available Code in features Register A.R.T. command 4 S.M.A.R.T. commandsInternet MySeagate Seagate Technology support services Online Services40Barracuda 5400.1 Product Manual, Rev. G Automated Phone ServicesUSA/Canada/Latin America Support Services Africa/Middle East Support Services European Support ServicesAsia/Pacific Support Services Barracuda 5400.1 Product Manual, Rev. G Index GMR Barracuda 5400.1 Product Manual, Rev. G 48Barracuda 5400.1 Product Manual, Rev. G Page Seagate Technology LLC

Related manuals

Manual 2 pages 30.5 Kb