Western Telematic IPS-800-CE Plug Parameters Menus, Plug Parameters Menu Web Browser Interface

Page 29

Conﬁguration

Figure 5.7: Plug Parameters Menu - Web Browser Interface

PLUG #1 PARAMETERS:
1.	Plug Name:	(undeﬁned)
2.	Password:	(undeﬁned)
3.	Boot/Seq. Delay:	1 Sec

Enter Selection,

Press <ESC> to Exit ...

Figure 5.8: Plug Parameters Menu - Text Interface (Plug 1 Shown)

5.3.3.Plug Parameters Menus

The Plug Parameters Menus are used to deﬁne Plug Names, Plug Passwords and boot / sequence delay times for each of the IPS’s Switched AC Outlets.

•Web Browser Interface: Click the "Setup" button to access the conﬁguration menus, then click the "Plug Parameters" button. The Plug Parameters Menu will be displayed as shown in Figure 5.7.

•Text Interface: Type /P n and then press [Enter] (Where n is the number or name of the plug you wish to conﬁgure.) The Plug Parameters Menu will be displayed as shown in Figure 5.8.

Note that in this case, the major difference between the Web Browser Interface and Text Interface is that the Web Browser Interface allows you to select parameters for all plugs from a single menu, whereas the Text Interface includes a separate menu for each plug.

5-11

Image 29

Contents Models User’s GuidePage Installation Instructions FCC Part 15 Regulation Table of Contents List of Figures Security Features and Co-Location Features Intelligent Power ControlEasy to Configure, Easy to Use IntroductionTypographic Conventions IPS-800, IPS-1600, IPS-800-CE and IPS-1600-CE UnitsIPS-800 Back Panel 120 VAC Model Shown Unit DescriptionIPS-800/IPS-1600 Series User’s Guide Quick Start Hardware InstallationApply Power to the IPS Connect your PC to the IPS Communicating with the IPSPlug Status Screen Web Browser Interface IPS-800 Shown Text Interface Text Interface Type /X and press Enter IPS-800/IPS-1600 Series User’s Guide Installing the Cable Keepers InstallationPower Supply Connection Connecting the Network Cable Connection to Switched OutletsConnecting a Local PC Connecting an External ModemSystem Mode and User Mode ConfigurationAccessing the Web Browser Interface Accessing the Text Interface $ telnet 192.168.168.168 Enter Configuration Menus General Parameters Menu Web Browser Interface General Parameters MenusGeneral Parameters Menu Text Interface IPS-800/IPS-1600 Series User’s Guide Serial Parameters Serial Parameters MenuIPS-800/IPS-1600 Series User’s Guide Plug Parameters Menu Web Browser Interface Plug Parameters MenusPlug Passwords and Co-Location Features Reboot Cycles Network Parameters Network Parameters MenusConﬁguration IP Security Feature Conﬁguration 12 Telnet Parameters Menu Web Browser Interface Telnet Parameters Menus14 Web Server Parameters Menu Web Browser Interface Web Server Parameters MenusSave Configuration Parameters Plug Status Screen Web Browser Interface OperationOperation via the Web Browser Interface Plug Status Menu Web Browser Interface IPS-800 Shown Plug Status Screen Text Interface Operation via the Text InterfaceOn 1 or /ON Router Boot/On/Off Commands Text InterfaceOFF 2 or /OF Router Applying Commands to Several Plugs Text InterfaceAutomated Mode Logging Out of Command ModeOperation Manual Operation Sending Parameters to a File Saving and Restoring Configuration ParametersRestoring Saved Parameters Upgrading the IPS Firmware IPS-800/IPS-1600 Series User’s Guide Apx-1 Interface DescriptionSerial COM / RS232 Port Interface Apx-2 SpecificationsApx-3 Customer ServiceApx-4 Trademark and Copyright InformationIndex-1 IndexIndex-2 IPS-4 Internet Power Switch User’s GuidePage IPS-800/IPS-1600 Series User’s Guide Page Sterling Irvine California 949 586-9950 Toll Free