Western Telematic IPS-800 Telnet Parameters Menus, Telnet Parameters Menu Web Browser Interface

Page 36

IPS-800/IPS-1600 Series - User’s Guide

Figure 5.12: Telnet Parameters Menu - Web Browser Interface

TELNET PARAMETERS:

1.	Service:	On
2.	Telnet Port #:	23

Enter Selection,

Press <ESC> to Exit ...

Figure 5.13: Telnet Parameters Menu - Text Interface

5.3.5.The Telnet Parameters Menus

The Telnet Parameters Menus are used to enable/disable Telnet access to the IPS command mode and select the TCP port for Telnet connections.

•Web Browser Interface: Click the "Setup" button to access the conﬁguration menus, and then click the "Telnet Parameters" button to display the menu shown in Figure 5.12.

•Text Interface: Type /T and press [Enter]. The Telnet Parameters Menu will be displayed as shown in Figure 5.13.

The Telnet Parameters Menus allow the following parameters to be deﬁned. Please note that all parameters listed here are available via both the Web Browser Interface and Text Interface.

•Service: Enables/Disables Telnet communication with the IPS unit. When this item is "Off," user’s will not be able to contact the unit via Telnet. (Default = On.)

•Port Number: Selects the TCP/IP port number that will be used for Telnet connections. (Default = 23.)

5-18

Image 36

Contents User’s Guide ModelsPage Installation Instructions FCC Part 15 Regulation Table of Contents List of Figures Intelligent Power Control Security Features and Co-Location FeaturesEasy to Configure, Easy to Use IntroductionIPS-800, IPS-1600, IPS-800-CE and IPS-1600-CE Units Typographic ConventionsUnit Description IPS-800 Back Panel 120 VAC Model ShownIPS-800/IPS-1600 Series User’s Guide Hardware Installation Apply Power to the IPSQuick Start Communicating with the IPS Connect your PC to the IPSPlug Status Screen Web Browser Interface IPS-800 Shown Text Interface Text Interface Type /X and press Enter IPS-800/IPS-1600 Series User’s Guide Installation Power Supply ConnectionInstalling the Cable Keepers Connection to Switched Outlets Connecting the Network CableConnecting a Local PC Connecting an External ModemConfiguration System Mode and User ModeAccessing the Web Browser Interface Accessing the Text Interface $ telnet 192.168.168.168 Enter Configuration Menus General Parameters Menus General Parameters Menu Web Browser InterfaceGeneral Parameters Menu Text Interface IPS-800/IPS-1600 Series User’s Guide Serial Parameters Menu Serial ParametersIPS-800/IPS-1600 Series User’s Guide Plug Parameters Menus Plug Parameters Menu Web Browser InterfacePlug Passwords and Co-Location Features Reboot Cycles Network Parameters Menus Network ParametersConﬁguration IP Security Feature Conﬁguration Telnet Parameters Menus 12 Telnet Parameters Menu Web Browser InterfaceWeb Server Parameters Menus 14 Web Server Parameters Menu Web Browser InterfaceSave Configuration Parameters Operation Operation via the Web Browser InterfacePlug Status Screen Web Browser Interface Plug Status Menu Web Browser Interface IPS-800 Shown Operation via the Text Interface Plug Status Screen Text InterfaceBoot/On/Off Commands Text Interface On 1 or /ON RouterApplying Commands to Several Plugs Text Interface OFF 2 or /OF RouterLogging Out of Command Mode Automated ModeOperation Manual Operation Saving and Restoring Configuration Parameters Sending Parameters to a FileRestoring Saved Parameters Upgrading the IPS Firmware IPS-800/IPS-1600 Series User’s Guide Interface Description Serial COM / RS232 Port InterfaceApx-1 Specifications Apx-2Customer Service Apx-3Trademark and Copyright Information Apx-4Index Index-1IPS-4 Internet Power Switch User’s Guide Index-2Page IPS-800/IPS-1600 Series User’s Guide Page Sterling Irvine California 949 586-9950 Toll Free