Westinghouse LCM-22W3 manual OSD Menu Functions

OSD Menu Functions

All the function settings for this LCD monitor are controlled via the control keys located on

the side of the monitor. To display the OSD main menu, press the “Menu” keypad button on the control panel. (Note: The OSD menu display will disappear automatically after approximately 10 seconds, if no action is taken.)

This LCD monitor has been adjusted to optimal settings before shipment. If needed, adjustments to the monitor settings can also be made using the OSD menu.

• Press the “Menu” button to display the OSD.

• Press the Turbo/￿ or Auto/￿ button to scroll through the sub-menus (Image, Audio, Color, Miscellaneous, and Information Sub-Menus).

•	Press the	/X button to enter the sub-menu.
•	Press the Turbo/￿or Auto/￿ button to select the function to be adjusted.

• Press the /W or/Xbuttons to change the current setting of the sub-function.

• To go back to the previous menu, press the button. Changes are saved automatically.

• To exit the OSD menu press "Menu" again. It automatically will save any changes

that have been made.

Image Menu

Audio Menu

Color Menu

Miscellaneous Menu

Info Menu

Source

Resolution & Frequency

NOTES:

•Any changes are automatically saved in memory when the OSD turns off. Turning off the power should be avoided while using the OSD menu.

•Adjustments for clock, phase, and positions are saved for each individual signal timing. Except for these adjustments, all other adjustments have only one setting, which applies to all signal timings.

•The icon color will change from gray to blue when a sub-menu is selected.

10