Tyco Electronics 1529L manual Gain of R, G, and B signal is adjusted

Page 44

OSD Control Options

Brightness

• Background Luminance of the LCD panel is adjusted

Contrast

• Gain of R, G, and B signal is adjusted.

Sharpness

• The sharpness can be adjustable.

Phase

• The phase of the dot clock is adjusted.

Auto Adjust

• Automatically adjusts the systems dot clock(takes approximately 5 seconds).

OSD Left/Right

• The osd screen is moved horizontally left and right.

OSD Up/Down

• The OSD screen is moved vertically up and down.

Clock

• The ratio of dividing frequency of the dot clock is adjusted.

Color Temperature

• Sets the R, G, and B gains.

Current Input

The frequency of the horizontal/vertical synchronizing signal under the input is indicated.(These information is under auto Adjust icon)

OSD Position

• The osd indication position can be selected.

Language

Select the language for the OSD menu from among English, France, Deutsch, Spanish and Japanese.

3-38 Elo Touchmonitor User Guide

Image 44
Contents Touchmonitor User Guide Elo Touchmonitor User Guide 008603E Elo TouchSystemsCopyright 2008 Tyco Electronics. All Rights Reserved Table of Contents Appendix B Page Introduction Product DescriptionDetailed LCD Display Performance Requirements Inch TFT LCD Display PanelCustomer Display Serial Version Optional ParametersCredit Card Reader Barcode ScannerExternal Power Supply Six Port USB HubElo Touchmonitor User Guide Installation and Setup Unpacking Your TouchmonitorProduct Overview Side View Base Bottom View KensingtonTM Lock USB Interface Connection Remove the Cable CoverHole in the second as shown in the picture above Page Elo Touchmonitor User Guide Page Elo Touchmonitor User Guide USB / Serial Interface Connection Hole in the second as shown in the picture above Page Elo Touchmonitor User Guide Page Elo Touchmonitor User Guide Replace the Cable Cover Finger Print Reader Installing the Peripheral Device DriversOptimizing the LCD Display Testing the USB MSR Keyboard Emulation Testing the USB-HID Class MSRMagnetic Stripe Reader Convert MSR from HID to keyboard EmulationConvert MSR from keyboard emulation to HID Rear Facing Customer DisplayInsert your Elo TouchTools CD Elo Touchmonitor User Guide Installing the Touch Driver Software MS DOSClick Start Run About Touchmonitor Adjustments OperationLCD Function Key Controls and Adjustment Power Lock/UnlockOSD Lock/Unlock OSD Menu FunctionsPhase Auto AdjustColor Temperature Recall DefaultsDisplay Angle Power-Save No InputPower LED Display & Power Saving General Power Saving Mode Take care not to touch the screen Controls and Adjustment Gain of R, G, and B signal is adjusted Restore all original factory defaults Elo Touchmonitor User Guide Troubleshooting Solutions to Common ProblemsElo Touchmonitor User Guide Native Resolution Input Video 15.0 LCDElo Touchmonitor User Guide Touchmonitor Safety Care and Handling of Your Touchmonitor Waste Electrical and Electronic EquipmentWEEE DirectiveTechnical Specifications Display ModesTouchmonitor Specifications Display ModeAccuTouch Touchscreen Specifications Mechanical ConstructionIntelliTouch Touchscreen Specifications Expected Life PerformanceInfrared Touchscreen Specifications Acoustic Pulse Recognition Specification ElectricalPage Elo Touchmonitor User Guide Electrical Safety Information Regulatory InformationElo Touchmonitor User Guide Vorsicht Elo Touchmonitor User Guide Warranty Elo Touchmonitor User Guide Index D E X Check out Elo’s Web site