Tyco Electronics 1529L manual IntelliTouch Touchscreen Specifications, Expected Life Performance

IntelliTouch Touchscreen Specifications

Mechanical
Positional Accuracy	Standard deviation of error is less than 0.080 in. (2.03 mm).
	Equates to less than ±1%.
Touchpoint Density	More than 100,000 touchpoints/in2 (15,500 touchpoints/cm2).
Touch Activation Force	Typically less than 3 ounces (85 grams).
Surface Durability	Surface durability is that of glass, Mohs’ hardness rating of 7.
Expected Life Performance	No known wear-out mechanism, as there are no layers, coatings,
	or moving parts. IntelliTouch technology has been operationally
	tested to more than 50 million touches in one location without
	failure, using a stylus similar to a finger.
Sealing	Unit is sealed to protect against splashed liquids, dirt, and dust.
Optical
Light Transmission (per ASTM	90%
D1003)
Visual Resolution	All measurements made using USAF 1951 Resolution Chart,
	under 30X magnification, with test unit located approximately
	1.5 in (38 mm) from surface of resolution chart.
	Clear surface: Excellent, with no noticeable degradation.
	Antiglare surface: 6:1 minimum.
Gloss (per ASTM D2457
using a 60-degree gloss meter)	Antiglare surface: Curved: 60 ± 20 gloss units or 75 ± 15 gloss
	units.
Environmental
Chemical Resistance	The active area of the touchscreen is resistant to all chemicals
	that do not affect glass, such as:
	Acetone
	Toluene
	Methyl ethyl ketone
	Isopropyl alcohol
	Methyl alcohol
	Ethyl acetate
	Ammonia-based glass cleaners
	Gasoline
	Kerosene
	Vinegar
Electrostatic Protection (per	Meets Levels 4 (15kV air/8 kV contact discharge)
EN 61 000-4-2, 1995)

C-50 Elo Touchmonitor User Guide