Tyco Electronics 1529L manual Infrared Touchscreen Specifications

Page 57

 

Infrared Touchscreen Specifications

Mechanical

 

Input Method

Input Method Finger or gloved hand activation

Electrical

 

Positional Accuracy

Typical centroid accuracy: 2 mm with 1 mm STD error

Resolution

Touchpoint density is based on controller resolution of 4096 x

 

 

4096

Touch Activation Force

No minimum touch activation force is required

Controller

Board: Serial (RS232) or USB 1.1

Optical

 

Light Transmission

Glass overlay: 90% per ASTM D1003-92

 

 

Environmental

Chemical Resistance

Glass overlays: The touch active area of the touchscreen is

 

 

resistant to chemicals that do not affect glass, such as: acetone,

 

 

toluene, methyl ethyl ketone, isopropyl alcohol, methyl alcohol,

 

 

ethyl acetate, ammonia-based glass cleaners, gasoline, kerosene,

 

 

vinegar. Polycarbonate bezel: around perimeter of display has

 

 

some sensitivity to hydrocarbons.

Durability

 

Surface Durability

Glass filter option: Surface durability is that of glass, Mohs’

 

 

hardness rating of 7.

 

 

 

C-51

Image 57
Contents Touchmonitor User Guide 008603E Elo TouchSystems Elo Touchmonitor User GuideCopyright 2008 Tyco Electronics. All Rights Reserved Table of Contents Appendix B Page Product Description IntroductionInch TFT LCD Display Panel Detailed LCD Display Performance RequirementsSerial Version Optional Parameters Customer DisplayBarcode Scanner Credit Card ReaderSix Port USB Hub External Power SupplyElo Touchmonitor User Guide Unpacking Your Touchmonitor Installation and SetupProduct Overview Side View Base Bottom View KensingtonTM Lock Remove the Cable Cover USB Interface ConnectionHole in the second as shown in the picture above Page Elo Touchmonitor User Guide Page Elo Touchmonitor User Guide USB / Serial Interface Connection Hole in the second as shown in the picture above Page Elo Touchmonitor User Guide Page Elo Touchmonitor User Guide Replace the Cable Cover Installing the Peripheral Device Drivers Optimizing the LCD DisplayFinger Print Reader Testing the USB-HID Class MSR Testing the USB MSR Keyboard EmulationMagnetic Stripe Reader Convert MSR from HID to keyboard EmulationRear Facing Customer Display Convert MSR from keyboard emulation to HIDInsert your Elo TouchTools CD Elo Touchmonitor User Guide MS DOS Installing the Touch Driver SoftwareClick Start Run Operation About Touchmonitor AdjustmentsLCD Function Key Power Lock/Unlock Controls and AdjustmentOSD Lock/Unlock OSD Menu FunctionsAuto Adjust PhaseColor Temperature Recall DefaultsPower-Save No Input Power LED Display & Power Saving General Power Saving ModeDisplay Angle Take care not to touch the screen Controls and Adjustment Gain of R, G, and B signal is adjusted Restore all original factory defaults Elo Touchmonitor User Guide Solutions to Common Problems TroubleshootingElo Touchmonitor User Guide Input Video 15.0 LCD Native ResolutionElo Touchmonitor User Guide Touchmonitor Safety Waste Electrical and Electronic EquipmentWEEE Directive Care and Handling of Your TouchmonitorDisplay Modes Technical SpecificationsDisplay Mode Touchmonitor SpecificationsMechanical Construction AccuTouch Touchscreen SpecificationsExpected Life Performance IntelliTouch Touchscreen SpecificationsInfrared Touchscreen Specifications Electrical Acoustic Pulse Recognition SpecificationPage Elo Touchmonitor User Guide Regulatory Information Electrical Safety InformationElo Touchmonitor User Guide Vorsicht Elo Touchmonitor User Guide Warranty Elo Touchmonitor User Guide Index D E X Check out Elo’s Web site