2.11 - Installing the Power Supply
There are two power connectors on your Tempest i5100X S5375. The Tempest i5100X S5375 requires 2 power inputs.
-
-
NOTE: Please be aware that ATX 2.x, ATX12V and ATXGES power supplies may not be compatible with the board and can damage the motherboard and/or CPU(s).
1 x
1 x
1 x
Applying power to the board:
1.Connect the 12V
2.Connect the EPS/12V
3.Connect the
4.Connect power cable to power supply and power outlet.
NOTE
YOU MUST unplug the power supply before plugging the power cables to motherboard connectors.
2.12 - Finishing up
Congratulations on making it this far! You’re finished setting up the hardware aspect of your computer. Before closing up your chassis, make sure that all cables and wires are connected properly, especially IDE cables and most importantly, jumpers. You may have difficulty powering on your system if the motherboard jumpers are not set correctly.
In the rare circumstance that you have experienced difficulty, you can find help by asking your vendor for assistance. If they are not available for assistance, please find setup information and documentation online at our website or by calling your vendor’s support line.
30