Tyan Computer I5100X, S5375 warranty South Bridge Configuration Sub-Menu, HDA Controller Enabled

3.6.2 South Bridge Configuration Sub-Menu

This menu gives options for customizing South Bridge Chipset settings. Select a menu by highlighting it using the Arrow (Ç/È) keys and pressing Enter. The settings are described on the following pages.

		BIOS Setup Utility				Chipset
Main Advanced	PCI/PnP		Boot		Security			Exit
South Bridge Chipset Configuration
HDA Controller		[Enabled]
SMBUS Controller		[Enabled]
SLP_S4# Min. Assertion Width		[1~2 seconds]				← → Select Screen
Restore on AC Power Loss		[Power Off]				↑↓ Select Item
Onboard VGA		[Enabled]				Enter Go to Sub Screen
						F1	General Help
Lan1		[Enabled]				F10	Save and Exit
Lan2		[Enabled]				ESC Exit
Chassis Intrusion Detect		[Disabled]
Feature	Option					Description
South Bridge Chipset Configuration
HDA Controller	Enabled			Enable or
(S5375AG2NR only)	Disabled			disable HDA controller
SMBUS Controller	Enabled			Enable or disable SMBUS controller
	Disabled
	4-5 seconds
SLP_S4# Min.	3-4 seconds			Select Timing for SLP_S4#
Assertion Width	2-3 seconds
	1-2 seconds
Restore on AC Power	Power Off			Configure how the system board
	Power On
Loss				responds to a power failure.
	Last State
Onboard VGA	Enabled			Enable or disable Onboard VGA
	Disabled			controller
Lan1/Lan2	Disabled			Enable or disable LAN1/LAN2
	Enabled
Chassis Intrusion	Disabled			Enable/Disable the function of chassis
				intrusion detect. When chassis open
Detect	Enabled			event is detected, BIOS will record the
				event.

65