Tyan Computer I5100X, S5375 warranty Remote Access Configuration Sub-Menu, Ansi, COM2

3.2.10 Remote Access Configuration Sub-Menu

You can use this screen to view the Remote Access Configuration Menu. This feature allows access to the Server remotely via serial port. Use the up and down arrow (Ç/È) keys to select an item. Use the Plus and Minus (+/-) keys to change the value of the selected option. The settings are described on the following pages.

	BIOS Setup Utility
Main Advanced PCI/PnP Boot		Security	Chipset		Exit
Configure Remote Access type and parameters			Select remote access
			type.
Remote Access	[Disabled]
Serial Port Number	[COM1]
Base Address, IRQ	[3F8h, 4]
Serial Port Mode	[115200 8, n, 1]		← → Select Screen
Flow Control	[None]
Redirection After BIOS POST	[Always]		↑↓ Select Item
Terminal Type	[ANSI]		+/-	Change Field
VT-UTF8 Combo Key Support	[Enabled]		F1	General Help
Sredir Memory Display Delay	[No Delay]		F10	Save and Exit
			ESC Exit
Feature	Option		Description
Configure Remote Access type and parameters
Remote Access	Enabled	Enables remote access to system
	Disabled	through serial port.
Serial Port Number	COM1	Select Serial Port for console
		redirection. Make sure the
	COM2
		selected port is enabled.
Base Address, IRQ	Read only
	115200 8,n,1
	57600 8,n,1
Serial Port Mode		Select Serial Port settings.
	38400 8,n,1
	19200 8,n,1
	9600 8,n,1

53